Em Tue, 23 Dec 2014 22:48:58 +0200
Antti Palosaari <cr...@iki.fi> escreveu:
> Convert driver to kernel I2C model. Old DVB proprietary model is
> still left there also.
>
> Signed-off-by: Antti Palosaari <cr...@iki.fi>
> ---
> drivers/media/dvb-frontends/Kconfig | 2 +-
> drivers/media/dvb-frontends/rtl2830.c | 167
> +++++++++++++++++++++++++++++
> drivers/media/dvb-frontends/rtl2830.h | 31 ++++++
> drivers/media/dvb-frontends/rtl2830_priv.h | 2 +
> 4 files changed, 201 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/dvb-frontends/Kconfig
> b/drivers/media/dvb-frontends/Kconfig
> index 6c75418..e8827fc 100644
> --- a/drivers/media/dvb-frontends/Kconfig
> +++ b/drivers/media/dvb-frontends/Kconfig
> @@ -443,7 +443,7 @@ config DVB_CXD2820R
>
> config DVB_RTL2830
> tristate "Realtek RTL2830 DVB-T"
> - depends on DVB_CORE && I2C
> + depends on DVB_CORE && I2C && I2C_MUX
> default m if !MEDIA_SUBDRV_AUTOSELECT
> help
> Say Y when you want to support this frontend.
> diff --git a/drivers/media/dvb-frontends/rtl2830.c
> b/drivers/media/dvb-frontends/rtl2830.c
> index 50e8b63..ec4a19c 100644
> --- a/drivers/media/dvb-frontends/rtl2830.c
> +++ b/drivers/media/dvb-frontends/rtl2830.c
> @@ -767,6 +767,173 @@ static struct dvb_frontend_ops rtl2830_ops = {
> .read_signal_strength = rtl2830_read_signal_strength,
> };
>
> +/*
> + * I2C gate/repeater logic
> + * We must use unlocked i2c_transfer() here because I2C lock is already taken
> + * by tuner driver. Gate is closed automatically after single I2C xfer.
> + */
> +static int rtl2830_select(struct i2c_adapter *adap, void *mux_priv, u32
> chan_id)
> +{
> + struct i2c_client *client = mux_priv;
> + struct rtl2830_priv *priv = i2c_get_clientdata(client);
> + struct i2c_msg select_reg_page_msg[1] = {
> + {
> + .addr = priv->cfg.i2c_addr,
> + .flags = 0,
> + .len = 2,
> + .buf = "\x00\x01",
> + }
> + };
> + struct i2c_msg gate_open_msg[1] = {
> + {
> + .addr = priv->cfg.i2c_addr,
> + .flags = 0,
> + .len = 2,
> + .buf = "\x01\x08",
> + }
> + };
> + int ret;
> +
> + /* select register page */
> + ret = __i2c_transfer(adap, select_reg_page_msg, 1);
> + if (ret != 1) {
> + dev_warn(&client->dev, "i2c write failed %d\n", ret);
> + if (ret >= 0)
> + ret = -EREMOTEIO;
> + goto err;
> + }
> +
> + priv->page = 1;
> +
> + /* open tuner I2C repeater for 1 xfer, closes automatically */
> + ret = __i2c_transfer(adap, gate_open_msg, 1);
> + if (ret != 1) {
> + dev_warn(&client->dev, "i2c write failed %d\n", ret);
> + if (ret >= 0)
> + ret = -EREMOTEIO;
> + goto err;
> + }
> +
> + return 0;
> +
> +err:
> + dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
> + return ret;
> +}
> +
> +static struct dvb_frontend *rtl2830_get_dvb_frontend(struct i2c_client
> *client)
> +{
> + struct rtl2830_priv *priv = i2c_get_clientdata(client);
> +
> + dev_dbg(&client->dev, "\n");
> +
> + return &priv->fe;
> +}
> +
> +static struct i2c_adapter *rtl2830_get_i2c_adapter(struct i2c_client *client)
> +{
> + struct rtl2830_priv *priv = i2c_get_clientdata(client);
> +
> + dev_dbg(&client->dev, "\n");
> +
> + return priv->adapter;
> +}
> +
> +static int rtl2830_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct rtl2830_platform_data *pdata = client->dev.platform_data;
> + struct i2c_adapter *i2c = client->adapter;
> + struct rtl2830_priv *priv;
> + int ret;
> + u8 u8tmp;
> +
> + dev_dbg(&client->dev, "\n");
> +
> + if (pdata == NULL) {
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + /* allocate memory for the internal state */
> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> + if (priv == NULL) {
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + /* setup the state */
> + i2c_set_clientdata(client, priv);
> + priv->i2c = i2c;
> + priv->sleeping = true;
> + priv->cfg.i2c_addr = client->addr;
> + priv->cfg.xtal = pdata->clk;
> + priv->cfg.spec_inv = pdata->spec_inv;
> + priv->cfg.vtop = pdata->vtop;
> + priv->cfg.krf = pdata->krf;
> + priv->cfg.agc_targ_val = pdata->agc_targ_val;
> +
> + /* check if the demod is there */
> + ret = rtl2830_rd_reg(priv, 0x000, &u8tmp);
> + if (ret)
> + goto err_kfree;
> +
> + /* create muxed i2c adapter for tuner */
> + priv->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
> + client, 0, 0, 0, rtl2830_select, NULL);
> + if (priv->adapter == NULL) {
> + ret = -ENODEV;
> + goto err_kfree;
> + }
> +
> + /* create dvb frontend */
> + memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(priv->fe.ops));
> + priv->fe.ops.release = NULL;
> + priv->fe.demodulator_priv = priv;
> +
> + /* setup callbacks */
> + pdata->get_dvb_frontend = rtl2830_get_dvb_frontend;
> + pdata->get_i2c_adapter = rtl2830_get_i2c_adapter;
> +
> + dev_info(&client->dev, "Realtek RTL2830 successfully attached\n");
> + return 0;
> +
> +err_kfree:
> + kfree(priv);
> +err:
> + dev_dbg(&client->dev, "failed=%d\n", ret);
> + return ret;
> +}
> +
> +static int rtl2830_remove(struct i2c_client *client)
> +{
> + struct rtl2830_priv *priv = i2c_get_clientdata(client);
> +
> + dev_dbg(&client->dev, "\n");
> +
> + i2c_del_mux_adapter(priv->adapter);
> + kfree(priv);
> + return 0;
> +}
> +
> +static const struct i2c_device_id rtl2830_id_table[] = {
> + {"rtl2830", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, rtl2830_id_table);
> +
> +static struct i2c_driver rtl2830_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "rtl2830",
> + },
> + .probe = rtl2830_probe,
> + .remove = rtl2830_remove,
> + .id_table = rtl2830_id_table,
> +};
> +
> +module_i2c_driver(rtl2830_driver);
> +
> MODULE_AUTHOR("Antti Palosaari <cr...@iki.fi>");
> MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/media/dvb-frontends/rtl2830.h
> b/drivers/media/dvb-frontends/rtl2830.h
> index 3313847..b925ea5 100644
> --- a/drivers/media/dvb-frontends/rtl2830.h
> +++ b/drivers/media/dvb-frontends/rtl2830.h
> @@ -24,6 +24,37 @@
> #include <linux/kconfig.h>
> #include <linux/dvb/frontend.h>
>
> +struct rtl2830_platform_data {
> + /*
> + * Clock frequency.
> + * Hz
> + * 4000000, 16000000, 25000000, 28800000
> + */
> + u32 clk;
> +
> + /*
> + * Spectrum inversion.
> + */
> + bool spec_inv;
> +
> + /*
> + */
> + u8 vtop;
> +
> + /*
> + */
> + u8 krf;
> +
> + /*
> + */
> + u8 agc_targ_val;
> +
> + /*
> + */
> + struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
> + struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
> +};
Please fix this to follow the Kernel CodingStyle for struct/function/...
documentation:
Documentation/kernel-doc-nano-HOWTO.txt
Sometimes, I just leave things like that to pass, but the above one is too
ugly, with empty multiple line comments, uncommented arguments, etc.
> +
> struct rtl2830_config {
> /*
> * Demodulator I2C address.
> diff --git a/drivers/media/dvb-frontends/rtl2830_priv.h
> b/drivers/media/dvb-frontends/rtl2830_priv.h
> index fab10ec..1a78351 100644
> --- a/drivers/media/dvb-frontends/rtl2830_priv.h
> +++ b/drivers/media/dvb-frontends/rtl2830_priv.h
> @@ -24,8 +24,10 @@
> #include "dvb_frontend.h"
> #include "dvb_math.h"
> #include "rtl2830.h"
> +#include <linux/i2c-mux.h>
>
> struct rtl2830_priv {
> + struct i2c_adapter *adapter;
> struct i2c_adapter *i2c;
> struct dvb_frontend fe;
> struct rtl2830_config cfg;
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
