I'm sorry, I resend the message with a descriptive subject >---- Mensaje original ---- >De : [email protected] >Fecha : 02/02/2015 - 16:04 (GMT) >Para : [email protected] >Asunto : > >Hi, > >As I faced problems with my Terratec Cinergy T PCIe Dual and was unable to >solve it (yet), I recently purchased a used Hauppauge HVR-2200 PCIe dual >tuner. I immediately ran into problems with the HVR-2200 as well, perfectly >described here: > >http://whirlpool.net.au/wiki/n54l_all_in_one >(scroll down or search "saa7164_cmd_send() No free sequences") > >Basically, it starts working but after a while I get an "Event timed out" >message and several i2c errors and VDR shuts down (some hours after reboot). >As the web page mentions, I tested downgrading the PCIe bandwith from GEN2 to >GEN1 without success. But after playing with different BIOS options, what did >the trick was limiting the power-saving C-states. If I select "C7" as the >maximum C-state, the card fails as described. After limiting the maximum >C-state to "C6", it has been working for a whole weekend. > >The HVR-2200 was also tested in a GA-H67MA-UD2H-B3 board with an G1610 >Celeron, working without problems (although maximum C-state setup was not >checked). > >Probably the error is present in other saa7164 boards. > >My VDR server is based on BayTrail J1900 (Asrock Q1900M). > >PS: I'm still waiting for advice regarding my Cinergy T/cx23885 problems and >debugging.
-- ------------------------------- dCrypt -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
