On 10/16/2015 11:53 AM, Hans Verkuil wrote:
On 09/04/2015 12:06 PM, Hans Verkuil wrote:
Hi Antti,

Two comments, see below:

On 09/01/2015 11:59 PM, Antti Palosaari wrote:
HackRF SDR device has both receiver and transmitter. There is limitation
that receiver and transmitter cannot be used at the same time
(half-duplex operation). That patch implements transmitter support to
existing receiver only driver.

Signed-off-by: Antti Palosaari <cr...@iki.fi>
---
  drivers/media/usb/hackrf/hackrf.c | 923 ++++++++++++++++++++++++++------------
  1 file changed, 648 insertions(+), 275 deletions(-)

diff --git a/drivers/media/usb/hackrf/hackrf.c 
b/drivers/media/usb/hackrf/hackrf.c
-static unsigned int hackrf_convert_stream(struct hackrf_dev *dev,
-               void *dst, void *src, unsigned int src_len)
+void hackrf_copy_stream(struct hackrf_dev *dev, void *dst,

Is there any reason 'static' was removed here? It's not used externally as
far as I can tell.

+                       void *src, unsigned int src_len)
  {
        memcpy(dst, src, src_len);


<snip>

+static int hackrf_s_modulator(struct file *file, void *fh,
+                      const struct v4l2_modulator *a)
+{
+       struct hackrf_dev *dev = video_drvdata(file);
+       int ret;
+
+       dev_dbg(dev->dev, "index=%d\n", a->index);
+
+       if (a->index == 0)
+               ret = 0;
+       else if (a->index == 1)
+               ret = 0;
+       else
+               ret = -EINVAL;
+
+       return ret;
+}

Why implement this at all? It's not doing anything. I'd just drop s_modulator
support.

If there is a reason why you do need it, then simplify it to:

        return a->index > 1 ? -EINVAL : 0;

Oops, I was wrong. You need this regardless for the simple reason that the spec
mandates it. And indeed without s_modulator v4l2-compliance will fail.

I've put back this function, but replacing the index check with the one-liner I
suggested above.

I'm merging this hackrf patch series with that change and a small fix for the
krobot 'unused intf' warning, so you don't need to do anything.

Thanks for doing this work!

OK, good! Update also documentation changelog / history kernel version number to one which is correct (~4.0 => 4.4).

regards
Antti

--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to