Hi Subhash,
> -----Original Message----- > From: subha...@codeaurora.org [mailto:subha...@codeaurora.org] > Sent: Thursday, March 10, 2011 6:54 PM > To: Nath, Arindam; c...@laptop.org > Cc: zhangfei....@gmail.com; prak...@marvell.com; linux- > m...@vger.kernel.org; Su, Henry; Lu, Aaron; anath....@gmail.com > Subject: RE: [PATCH v2 10/12] mmc: sdhci: enable preset value after uhs > initialization > > > > > -----Original Message----- > > From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc- > > ow...@vger.kernel.org] On Behalf Of Arindam Nath > > Sent: Friday, March 04, 2011 5:03 PM > > To: c...@laptop.org > > Cc: zhangfei....@gmail.com; prak...@marvell.com; > > subha...@codeaurora.org; linux-mmc@vger.kernel.org; henry...@amd.com; > > aaron...@amd.com; anath....@gmail.com; Arindam Nath > > Subject: [PATCH v2 10/12] mmc: sdhci: enable preset value after uhs > > initialization > > > > According to the Host Controller spec v3.00, setting Preset Value > > Enable > > in the Host Control2 register lets SDCLK Frequency Select, Clock > > Generator > > Select and Driver Strength Select to be set automatically by the Host > > Controller based on the UHS-I mode set. This patch enables this > > feature. > > We also reset Preset Value Enable when the card is removed from the > > slot. > > What does this preset_value means? Is this defined in SD3.01 spec? I > think > it looks like specific to your controller (sdhci). If it's specific to > your > controller then this new mmc_ops should not be added. Preset Value Enable is very much part of the standard SD Host Controller spec v3.00. Please refer to Host Control 2 register. Thanks, Arindam > > > > > > Signed-off-by: Arindam Nath <arindam.n...@amd.com> > > --- > > drivers/mmc/core/sd.c | 7 +++++++ > > drivers/mmc/host/sdhci.c | 36 ++++++++++++++++++++++++++++++++++++ > > include/linux/mmc/host.h | 1 + > > 3 files changed, 44 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c > > index 1e2d157..ae7a771 100644 > > --- a/drivers/mmc/core/sd.c > > +++ b/drivers/mmc/core/sd.c > > @@ -962,6 +962,13 @@ static int mmc_sd_init_card(struct mmc_host > *host, > > u32 ocr, > > } > > } > > > > + /* > > + * Since initialization is now complete, enable preset > > + * value registers. > > + */ > > + if (host->ops->enable_preset_value) > > + host->ops->enable_preset_value(host); > > + > > host->card = card; > > return 0; > > > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > > index 8f4f102..1f6e4ad 100644 > > --- a/drivers/mmc/host/sdhci.c > > +++ b/drivers/mmc/host/sdhci.c > > @@ -1602,6 +1602,40 @@ out: > > spin_unlock_irqrestore(&host->lock, flags); > > } > > > > +static void sdhci_enable_preset_value(struct mmc_host *mmc) > > +{ > > + struct sdhci_host *host; > > + u16 ctrl; > > + unsigned long flags; > > + > > + host = mmc_priv(mmc); > > + > > + /* Host Controller v3.00 defines preset value registers */ > > + if (host->version < SDHCI_SPEC_300) > > + return; > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > + ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE; > > + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); > > + > > + spin_unlock_irqrestore(&host->lock, flags); > > +} > > + > > +static void sdhci_disable_preset_value(struct sdhci_host *host) > > +{ > > + u16 ctrl; > > + > > + /* Only for Host Controller version >= v3.00 */ > > + if (host->version < SDHCI_SPEC_300) > > + return; > > + > > + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > + ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; > > + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); > > +} > > + > > static const struct mmc_host_ops sdhci_ops = { > > .request = sdhci_request, > > .set_ios = sdhci_set_ios, > > @@ -1610,6 +1644,7 @@ static const struct mmc_host_ops sdhci_ops = { > > .start_signal_voltage_switch = > > sdhci_start_signal_voltage_switch, > > .get_max_current_180 = sdhci_get_max_current_180, > > .execute_tuning = sdhci_execute_tuning, > > + .enable_preset_value = sdhci_enable_preset_value, > > }; > > > > > > > /********************************************************************** > > *******\ > > @@ -1920,6 +1955,7 @@ static irqreturn_t sdhci_irq(int irq, void > > *dev_id) > > sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT | > > SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS); > > tasklet_schedule(&host->card_tasklet); > > + sdhci_disable_preset_value(host); > > } > > > > intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE); > > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > > index 651e40b..e63e063 100644 > > --- a/include/linux/mmc/host.h > > +++ b/include/linux/mmc/host.h > > @@ -130,6 +130,7 @@ struct mmc_host_ops { > > int (*start_signal_voltage_switch)(struct mmc_host *host); > > int (*get_max_current_180)(struct mmc_host *mmc); > > void (*execute_tuning)(struct mmc_host *host); > > + void (*enable_preset_value)(struct mmc_host *host); > > }; > > > > struct mmc_card; > > -- > > 1.7.1 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-mmc" > in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
