Hi Andrei, Is there any more change to your V4 than the ones we discussed yesterday? I did the mod we discussed, but seems like the driver only sends CMD23 now, not Auto CMD23.
Thanks, Arindam > -----Original Message----- > From: Andrei Warkentin [mailto:andr...@motorola.com] > Sent: Wednesday, April 27, 2011 7:41 AM > To: linux-mmc@vger.kernel.org > Cc: Andrei Warkentin; Nath, Arindam; c...@laptop.org; a...@arndb.de; > subha...@codeaurora.org > Subject: [[v4] 5/5] MMC: SDHCI AutoCMD23 support. > > Enables Auto-CMD23 support where available (SDHCI 3.0 controllers) > > Cc: arindam.n...@amd.com > Cc: c...@laptop.org > Cc: a...@arndb.de > Cc: subha...@codeaurora.org > Signed-off-by: Andrei Warkentin <andr...@motorola.com> > --- > drivers/mmc/host/sdhci.c | 17 ++++++++++++++++- > drivers/mmc/host/sdhci.h | 2 ++ > include/linux/mmc/sdhci.h | 1 + > 3 files changed, 19 insertions(+), 1 deletions(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 41c987d..bf9aedb 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -844,7 +844,13 @@ static void sdhci_set_transfer_mode(struct > sdhci_host *host, > if (!host->mrq->sbc && > host->flags & SDHCI_ACMD12) > mode |= SDHCI_TRNS_ACMD12; > + else if (host->mrq->sbc && > + host->flags & SDHCI_ACMD23) { > + mode |= SDHCI_TRNS_ACMD23; > + sdhci_writel(host, host->mrq->sbc->arg, > SDHCI_ARGUMENT2); > + } > } > + > if (data->flags & MMC_DATA_READ) > mode |= SDHCI_TRNS_READ; > if (host->flags & SDHCI_REQ_USE_DMA) > @@ -1189,7 +1195,7 @@ static void sdhci_request(struct mmc_host *mmc, > struct mmc_request *mrq) > tasklet_schedule(&host->finish_tasklet); > } else { > > - if (mrq->sbc) > + if (mrq->sbc && !(host->flags & SDHCI_ACMD23)) > sdhci_send_command(host, mrq->sbc); > else > sdhci_send_command(host, mrq->cmd); > @@ -1947,6 +1953,15 @@ int sdhci_add_host(struct sdhci_host *host) > if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) > host->flags |= SDHCI_ACMD12; > > + /* Auto-CMD23 stuff only works in ADMA or PIO. */ > + if ((host->version == SDHCI_SPEC_300) && > + ((host->flags & SDHCI_USE_ADMA) || > + !(host->flags & SDHCI_REQ_USE_DMA))) { > + host->flags |= SDHCI_ACMD23; > + printk(KERN_INFO "%s: Auto-CMD23 available\n", > mmc_hostname(mmc)); > + } else > + printk(KERN_INFO "%s: Auto-CMD23 unavailable\n", > mmc_hostname(mmc)); > + > /* > * A controller may support 8-bit width, but the board itself > * might not have the pins brought out. Boards that support > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index 85750a9..2b3fb76 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -25,6 +25,7 @@ > */ > > #define SDHCI_DMA_ADDRESS 0x00 > +#define SDHCI_ARGUMENT2 0x00 > > #define SDHCI_BLOCK_SIZE 0x04 > #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & > 0xFFF)) > @@ -37,6 +38,7 @@ > #define SDHCI_TRNS_DMA 0x01 > #define SDHCI_TRNS_BLK_CNT_EN 0x02 > #define SDHCI_TRNS_ACMD12 0x04 > +#define SDHCI_TRNS_ACMD23 0x08 > #define SDHCI_TRNS_READ 0x10 > #define SDHCI_TRNS_MULTI 0x20 > > diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h > index c54ac14..d91585a 100644 > --- a/include/linux/mmc/sdhci.h > +++ b/include/linux/mmc/sdhci.h > @@ -110,6 +110,7 @@ struct sdhci_host { > #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ > #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ > #define SDHCI_ACMD12 (1<<4) /* Auto CMD12 support */ > +#define SDHCI_ACMD23 (1<<5) /* Auto CMD23 support */ > > unsigned int version; /* SDHCI spec. version */ > > -- > 1.7.0.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
