Hi Tony, Can you queue this patch ?
On Fri, Sep 9, 2011 at 7:34 PM, T Krishnamoorthy, Balaji <balaj...@ti.com> wrote: > On Fri, Aug 12, 2011 at 8:43 PM, Buckley, Bryan <bryan.buck...@ti.com> wrote: >> On Fri, Jul 22, 2011 at 7:30 AM, Kishore Kadiyala >> <kishorek.kadiy...@gmail.com> wrote: >>> >>> On Fri, Jul 22, 2011 at 12:59 AM, Bryan Buckley <bryan.buck...@ti.com> >>> wrote: >>> > Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for >>> > MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in >>> > accordance >>> > with the control module programming guide. This fixes a bug where if >>> > trying to >>> > use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be >>> > affected by a changing SDMMC1_VDDS. >>> > >>> > Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low >>> > whenever >>> > SDMMC1_VDDS ramps up/down or changes for cell protection purposes. >>> > >>> > MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore >>> > they can operate independently. >>> > >>> > Signed-off-by: Bryan Buckley <bryan.buck...@ti.com> >>> >>> Good catch, >>> >>> Acked-by: Kishore Kadiyala <kishore.kadiy...@ti.com> >>> >> >> Any other comments from anyone else? Noticed that this commit isn't >> in any upstream branches. This patch will fix issues with people who >> want to use GPIO 98/99 AND MMC1 at the same time. Would be good to >> have this fix upstream. >> > FWIW: Tested on OMAP4 Blaze > Tested-by: Balaji T K <balaj...@ti.com> > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
