Correct the judgement logic. When regulator vmmc is used, the voltage caps
should be cleared manually when both below conditions are true:
1. The requested voltage range is actually not supported by the regulator.
2. The voltage caps read from the capability register has been set.
Signed-off-by: Kevin Liu <kl...@marvell.com>
---
drivers/mmc/host/sdhci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 122c4c92..1591912 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2980,13 +2980,13 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->vmmc) {
ret = regulator_is_supported_voltage(host->vmmc, 2700000,
3600000);
- if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
+ if ((ret <= 0) && (caps[0] & SDHCI_CAN_VDD_330))
caps[0] &= ~SDHCI_CAN_VDD_330;
- if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
+ if ((ret <= 0) && (caps[0] & SDHCI_CAN_VDD_300))
caps[0] &= ~SDHCI_CAN_VDD_300;
ret = regulator_is_supported_voltage(host->vmmc, 1700000,
1950000);
- if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
+ if ((ret <= 0) && (caps[0] & SDHCI_CAN_VDD_180))
caps[0] &= ~SDHCI_CAN_VDD_180;
}
#endif /* CONFIG_REGULATOR */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
