On Wed, Aug 21, 2013 at 4:00 PM, Tomasz Figa <t.f...@samsung.com> wrote:
> Hi Yuvaraj,
>
> On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote:
>> This patch adds the device tree node entries for exynos5420 SOC.
>> Exynos5420 has a different version of DWMMC controller,so a new
>> compatible string is used to distinguish it from the prior SOC's.
>
> What are the difference between both versions? Is there a patch adding the
> new compatible to the driver somewhere?
Exynos5250 has DWMMC controller of IP version 2.41a
Exynos5420 has DWMMC controller of IP version 2.50a
In addition Exynos5420 has Security Management Unit for eMMC.
>
>> changes since V1:
>> 1.disable node by status = disabled in SOC file
>> 2.enable node by status = okay in board specific file
>
> Ahh, so you fixed this already in this version, thanks. Haven't noticed
> this patch at first and commented on previous one. Sorry for the noise.
>
>>
>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj...@samsung.com>
>> ---
>> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 ++
>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 38
>> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi
>> | 36 +++++++++++++++++++ 3 files changed, 76 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index
>> 6d1c098..84cd56f 100644
>> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> @@ -16,6 +16,8 @@ Required Properties:
>> specific extensions.
>> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
>> specific extensions.
>> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
>> + specific extensions.
>>
>> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card
>> interface unit (ciu) clock. This property is applicable only for Exynos5
>> SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278
>> 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -31,6 +31,44 @@
>> };
>> };
>>
>> + dwmmc0@12200000 {
>> + status = "okay";
>> + num-slots = <1>;
>
> You don't have to specify this property if there is only one slot. Also are
> you sure that this is a board specific property?
Yes,If num-slots property is not defined dw_mmc driver assumes 1 slot
is available.
I think yes,its a board specific property as number of card slots is
board dependent.
>
>> + broken-cd;
>> + bypass-smu;
>
> This property doesn't seem to be documented nor used anywhere.
Sorry. I missed to add in binding document.Will add in next version.
>
>> + supports-highspeed;
>
> Is it a board specific property?
>
>> + fifo-depth = <0x80>;
>
> Ditto.
Ideally this can be move to SOC specific dts.But I am just following
,already merged smdk5250 board
dts convensions.
>
>> + card-detect-delay = <200>;
>> + samsung,dw-mshc-ciu-div = <3>;
>> + samsung,dw-mshc-sdr-timing = <0 4>;
>> + samsung,dw-mshc-ddr-timing = <0 2>;
>
> Are the above three properties really board-specific?
>
> Same for remaining nodes.
>
> Best regards,
> Tomasz
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
