On Fri, Aug 23, 2013 at 4:36 AM, Tomasz Figa <tomasz.f...@gmail.com> wrote:
> On Thursday 22 of August 2013 12:24:58 Yuvaraj Kumar wrote:
>> On Wed, Aug 21, 2013 at 4:00 PM, Tomasz Figa <t.f...@samsung.com> wrote:
>> > Hi Yuvaraj,
>> >
>> > On Wednesday 21 of August 2013 12:13:53 Yuvaraj Kumar C D wrote:
>> >> This patch adds the device tree node entries for exynos5420 SOC.
>> >> Exynos5420 has a different version of DWMMC controller,so a new
>> >> compatible string is used to distinguish it from the prior SOC's.
>> >
>> > What are the difference between both versions? Is there a patch adding
>> > the new compatible to the driver somewhere?
>>
>> Exynos5250 has DWMMC controller of IP version 2.41a
>> Exynos5420 has DWMMC controller of IP version 2.50a
>> In addition Exynos5420 has Security Management Unit for eMMC.
>
> OK. What about my second question?
Below is the link.
http://permalink.gmane.org/gmane.linux.kernel.mmc/21060
>
>> >> changes since V1:
>> >>       1.disable node by status = disabled in SOC file
>> >>       2.enable node by status = okay in board specific file
>> >
>> > Ahh, so you fixed this already in this version, thanks. Haven't
>> > noticed
>> > this patch at first and commented on previous one. Sorry for the
>> > noise.
>> >
>> >> Signed-off-by: Yuvaraj Kumar C D <yuvaraj...@samsung.com>
>> >> ---
>> >>
>> >>  .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |    2 ++
>> >>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   38
>> >>
>> >> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi
>> >>
>> >> |   36 +++++++++++++++++++ 3 files changed, 76 insertions(+)
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> >> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index
>> >> 6d1c098..84cd56f 100644
>> >> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> >> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> >>
>> >> @@ -16,6 +16,8 @@ Required Properties:
>> >>         specific extensions.
>> >>
>> >>       - "samsung,exynos5250-dw-mshc": for controllers with Samsung
>> >>       Exynos5250
>> >>
>> >> specific extensions.
>> >> +     - "samsung,exynos5420-dw-mshc": for controllers with Samsung
>> >> Exynos5420 +       specific extensions.
>> >>
>> >>  * samsung,dw-mshc-ciu-div: Specifies the divider value for the card
>> >>
>> >> interface unit (ciu) clock. This property is applicable only for
>> >> Exynos5 SoC's and diff --git
>> >> a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..6e65278
>> >> 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> @@ -31,6 +31,44 @@
>> >>
>> >>               };
>> >>
>> >>       };
>> >>
>> >> +     dwmmc0@12200000 {
>> >> +             status = "okay";
>> >> +             num-slots = <1>;
>> >
>> > You don't have to specify this property if there is only one slot.
>> > Also are you sure that this is a board specific property?
>>
>> Yes,If num-slots property is not defined dw_mmc driver assumes 1 slot
>> is available.
>> I think yes,its a board specific property as number of card slots is
>> board dependent.
>>
>> >> +             broken-cd;
>> >> +             bypass-smu;
>> >
>> > This property doesn't seem to be documented nor used anywhere.
>>
>> Sorry. I missed to add in binding document.Will add in next version.
>
> Is there a patch adding support for this property to the driver?
Yes.You can find here http://permalink.gmane.org/gmane.linux.kernel.mmc/21060
>
>> >> +             supports-highspeed;
>> >
>> > Is it a board specific property?
>> >
>> >> +             fifo-depth = <0x80>;
>> >
>> > Ditto.
>>
>> Ideally this can be move to SOC specific dts.But I am just following
>> ,already merged smdk5250 board
>> dts convensions.
>
> This means that Exynos5250 board dts files need to be fixed as well.
>
>> >> +             card-detect-delay = <200>;
>> >> +             samsung,dw-mshc-ciu-div = <3>;
>> >> +             samsung,dw-mshc-sdr-timing = <0 4>;
>> >> +             samsung,dw-mshc-ddr-timing = <0 2>;
>> >
>> > Are the above three properties really board-specific?
>
> Hmm?
I am not sure about this. But Doug Anderson has pointed out these as
board specific properties.
>
> Best regards,
> Tomasz
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" 
> in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to