On 12/17/2013 11:54 PM, zhangfei wrote:
>
>
> On 12/17/2013 10:03 PM, Dinh Nguyen wrote:
>> Hi Zhangfei,
>>
>> On 12/17/13 2:11 AM, zhangfei wrote:
>>>
>>>
>>> On 12/17/2013 01:01 AM, dingu...@altera.com wrote:
>>>> From: Dinh Nguyen <dingu...@altera.com>
>>>>
>>>> This patch will enable the SDMMC_CMD_USE_HOLD_REG bit when the slot is
>>>> operating all timing modes, except for SDR50, DDR50, SDR104, and
>>>> MMC_HS200.
>>>>
>>>> According to the Synopsys databook :"To meet the relatively high
>>>> Input Hold
>>>> Time requirement for SDR12, SDR25, and other MMC speed modes, you should
>>>> program bit[29]use_hold_Reg of the CMD register to 1'b1;"..."However,
>>>> for
>>>> the higher speed modes of SDR104, SDR50 and DDR50, you can meet the much
>>>> smaller Input Hold Time requirement of 0.8ns by bypassing the Hold
>>>> Register
>>>> (Path A in Figure 10-8, programming CMD.use_hold_reg = 1'b0) and then
>>>> adding
>>>> delay elements on the output path as indicated.
>>>>
>>>> Also, "Never set CMD.use_hold_reg = 1 and cclk_in_drv phase shift to
>>>> 0 at the
>>>> same time. This would add an extra one-cycle delay on the output
>>>> path, resulting
>>>> in incorrect behavior."
>>>>
>>>> This patch also checks the IHR(Implement Hold Register) in the HCON
>>>> register.
>>>>
>>>> This information is taking from the v2.50a of the Synopsys Designware
>>>> Cores
>>>> Mobile Storage Host Databook.
>>>>
>>>> Signed-off-by: Dinh Nguyen <dingu...@altera.com>
>>>> Acked-by: Arnd Bergmann <a...@arndb.de>
>>>> Acked-by: Heiko Stuebner <he...@sntech.de>
>>>> Tested-by: Heiko Stuebner <he...@sntech.de>
>>>> ---
>>>> v4: use_hold_reg should be set for all modes when cclk_in_drv is
>>>> non-zero.
>>>> v3: Read the IHR(Implement Hold Register) in the HCON
>>>> v2: Add check for cclk_in_drv phase shift in conjunction with
>>>> use_hold_reg.
>>>> ---
>>>> drivers/mmc/host/dw_mmc.c | 52
>>>> ++++++++++++++++++++++++++++++++++++++++++++
>>>> drivers/mmc/host/dw_mmc.h | 4 ++++
>>>> include/linux/mmc/dw_mmc.h | 3 +++
>>>> 3 files changed, 59 insertions(+)
>>>>
>>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>>> /*
>>>> * Use mirror of ios->clock to prevent race with mmc
>>>> * core ios update when finding the minimum.
>>>> @@ -2339,6 +2361,8 @@ static struct dw_mci_board
>>>> *dw_mci_parse_dt(struct dw_mci *host)
>>>> const struct dw_mci_drv_data *drv_data = host->drv_data;
>>>> int idx, ret;
>>>> u32 clock_frequency;
>>>> + int sdr_timing[2];
>>>> + int ddr_timing[2];
>>>>
>>>> pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>>>> if (!pdata) {
>>>> @@ -2389,6 +2413,25 @@ static struct dw_mci_board
>>>> *dw_mci_parse_dt(struct dw_mci *host)
>>>> if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
>>>> pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
>>>>
>>>> + /* Check for the "samsung,dw-mshc-sdr-timing" and the
>>>> + * "samsung,dw-mshc-ddr-timing" bindings as this will tell us if we
>>>> + * can safely set the SDMMC_CMD_USE_HOLD_REG bit. The second
>>>> paramater
>>>> + * in these 2 bindings is the value of the cclk_in_drv. If
>>>> cclk_in_drv
>>>> + * is 0, we cannot set the SDMMC_CMD_USE_HOLD_REG bit. The default
>>>> + * behavior will be to set cclk_in_drv, as some platforms do not
>>>> have
>>>> + * to set the sdr or ddr timing parameters.
>>>> + */
>>>> + sdr_timing[1] = ddr_timing[1] = 1;
>>>> + of_property_read_u32_array(np,
>>>> + "samsung,dw-mshc-sdr-timing", sdr_timing, 2);
>>>> +
>>>> + of_property_read_u32_array(np,
>>>> + "samsung,dw-mshc-ddr-timing", ddr_timing, 2);
>>>> +
>>>> + pdata->cclk_in_drv = 1;
>>>> + if ((sdr_timing[1] == 0) || (ddr_timing[1] == 0))
>>>> + pdata->cclk_in_drv = 0;
>>>> +
>>>
>>> Have some concern about whether it is suitable putting "samsung,~"
>>> property in dw_mmc.c, is it supposed to be platform related?
>>> Any conflict with drivers/mmc/host/dw_mmc-exynos.c?
>>> If they are really commonly used, how about change name and define in
>>> Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt?
>> I had submitted a patch to make this a common binding before:
>>
>> http://www.spinics.net/lists/devicetree/msg00638.html
>>
>> I think the ultimate conclusion to that thread was that its perfectly
>> acceptable to re-use bindings from other
>> platforms.
>>
>
> Hmm, ususally I may look for the properties of dw_mmc.c in
> synopsys-dw-mshc.txt.
> If this is the conclusion before, then just ignore this noise.
If can be removed the samsung property, then i think property of clock timing
can be used into dw-mmc.c
But if samsung property is used, well. I think right that it's used into
dw_mmc-exynos.c.
Dw-mmc.c is general driver..so we don't want to include any SoC specific code.
If i missed something, then let me know, plz.
Best Regards,
Jaehoon Chung
>
> Thanks
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
