Hi, On 16 September 2015 at 10:36, Jaehoon Chung <jh80.ch...@samsung.com> wrote: > Hi, > > On 09/10/2015 12:02 PM, Yousong Zhou wrote: >> On 10 September 2015 at 08:33, Shawn Lin <shawn....@rock-chips.com> wrote: >>> On 2015/9/10 0:33, Yousong Zhou wrote: >>>> >>>> This will allow retrying access mode switch to High-Speed in the >>>> following commit. > > Well, it's not solution. (It's my preference.) > Did you consider the card removable case? > > Could you share which vendor's card needs to retry? >
It's a SD card labeled as "pqi" made in Korea. The issue was found on sunxi-mmc controller where it reported response crc error when trying to switch the card into highspeed mode. The idea about retrying the access mode switch was from U-Boot code of Allwinner (vendor of sunxi SoCs). The code comments there said this issue can happen with eMMC cards from Toshiba [1]. The above info was also said in a previous discussion [1]. A sunxi-mmc specific change as suggested by Hans de Geode should definitely be a safer move. But that requires more fundamental framework code change I guess. [1] https://github.com/allwinner-zh/bootloader/blob/master/u-boot-2011.09/drivers/mmc/mmc.c#L2220 [2] http://thread.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/18442/focus=18480 Regards, yousong > Best Regards, > Jaehoon Chung > >>>> >>>> Signed-off-by: Yousong Zhou <yszhou4t...@gmail.com> >>>> --- >>>> drivers/mmc/core/core.c | 4 ++++ >>>> drivers/mmc/core/sd_ops.c | 5 +++-- >>>> drivers/mmc/core/sd_ops.h | 10 ++++++++-- >>>> 3 files changed, 15 insertions(+), 4 deletions(-) >>>> >>> >>> I test this patchset with my already-working sd cards, seems ok. >>> Actually I don't have a card to test like yours that need retry switch HS, >>> but from the changes itself, it's harmless to other cards. >> >> Thanks for the testing. >> >> Those cards normally won't burn out after MMC_CMD_RETRIES access mode switch >> failures, right? >> >>> >>> so, >>> >>> Tested-by: Shawn Lin <shawn....@rock-chips.com> >>> >>> BTW, I can't find the cover letter? And another should be clarified, plz see >>> comment blow >>> >>> >>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >>>> index 9ad73f3..e726bb1 100644 >>>> --- a/drivers/mmc/core/core.c >>>> +++ b/drivers/mmc/core/core.c >>>> @@ -468,11 +468,13 @@ static void mmc_wait_for_req_done(struct mmc_host >>>> *host, >>>> struct mmc_request *mrq) >>>> { >>>> struct mmc_command *cmd; >>>> + struct mmc_data *data; >>>> >>>> while (1) { >>>> wait_for_completion(&mrq->completion); >>>> >>>> cmd = mrq->cmd; >>>> + data = mrq->data; >>>> >>>> /* >>>> * If host has timed out waiting for the sanitize >>>> @@ -501,6 +503,8 @@ static void mmc_wait_for_req_done(struct mmc_host >>>> *host, >>>> mmc_hostname(host), cmd->opcode, cmd->error); >>>> cmd->retries--; >>>> cmd->error = 0; >>>> + if (data) >>>> + data->error = 0; >>> >>> >>> What's this change for? >> >> sunxi-mmc will set both cmd->error and data->error to -ETIMEDOUT in case of >> any >> interrupt error bit was set (related code within `sunxi_finalize_request()'). >> >> `__mmc_sd_switch()' thought it was a error case if data->error != 0. >> >> So the data->error bit needs to be cleared before next retry. >> >> Regards, >> >> yousnog >> >>> >>> >>>> __mmc_start_request(host, mrq); >>>> } >>>> >>>> diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c >>>> index 48d0c93..22bef3c 100644 >>>> --- a/drivers/mmc/core/sd_ops.c >>>> +++ b/drivers/mmc/core/sd_ops.c >>>> @@ -304,8 +304,8 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) >>>> return 0; >>>> } >>>> >>>> -int mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>> - u8 value, u8 *resp) >>>> +int __mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>> + u8 value, u8 *resp, int retries) >>>> { >>>> struct mmc_request mrq = {NULL}; >>>> struct mmc_command cmd = {0}; >>>> @@ -328,6 +328,7 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int >>>> group, >>>> cmd.arg &= ~(0xF << (group * 4)); >>>> cmd.arg |= value << (group * 4); >>>> cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; >>>> + cmd.retries = retries; >>>> >>>> data.blksz = 64; >>>> data.blocks = 1; >>>> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h >>>> index ffc2305..a53c51e 100644 >>>> --- a/drivers/mmc/core/sd_ops.h >>>> +++ b/drivers/mmc/core/sd_ops.h >>>> @@ -17,9 +17,15 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 >>>> ocr, u32 *rocr); >>>> int mmc_send_if_cond(struct mmc_host *host, u32 ocr); >>>> int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca); >>>> int mmc_app_send_scr(struct mmc_card *card, u32 *scr); >>>> -int mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>> - u8 value, u8 *resp); >>>> int mmc_app_sd_status(struct mmc_card *card, void *ssr); >>>> >>>> +int __mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>> + u8 value, u8 *resp, int retries); >>>> +static inline int mmc_sd_switch(struct mmc_card *card, int mode, int >>>> group, >>>> + u8 value, u8 *resp) >>>> +{ >>>> + return __mmc_sd_switch(card, mode, group, value, resp, 0); >>>> +} >>>> + >>>> #endif >>>> >>>> >>> >>> >>> -- >>> Best Regards >>> Shawn Lin >>> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
