Hi, Yousong. On 09/16/2015 12:09 PM, Yousong Zhou wrote: > Hi, > > On 16 September 2015 at 10:36, Jaehoon Chung <jh80.ch...@samsung.com> wrote: >> Hi, >> >> On 09/10/2015 12:02 PM, Yousong Zhou wrote: >>> On 10 September 2015 at 08:33, Shawn Lin <shawn....@rock-chips.com> wrote: >>>> On 2015/9/10 0:33, Yousong Zhou wrote: >>>>> >>>>> This will allow retrying access mode switch to High-Speed in the >>>>> following commit. >> >> Well, it's not solution. (It's my preference.) >> Did you consider the card removable case? >> >> Could you share which vendor's card needs to retry? >> > > It's a SD card labeled as "pqi" made in Korea. The issue was found on > sunxi-mmc controller where it reported response crc error when trying > to switch the card into highspeed mode.
Did you test on other target with that card? On other words, is Sd-card working fine on your real phone or other target? If it's occurred on only sunxi-mmc controller, this is not solution. And Your comment means "have only to retry when failed to switch high-speed mode.", doesn't? Do you feel it's reasonable? It's same that adds the delay. > > The idea about retrying the access mode switch was from U-Boot code of > Allwinner (vendor of sunxi SoCs). The code comments there said this > issue can happen with eMMC cards from Toshiba [1]. Why did you compare to U-boot? There are too many differences for user-case. > > The above info was also said in a previous discussion [1]. A > sunxi-mmc specific change as suggested by Hans de Geode should > definitely be a safer move. But that requires more fundamental > framework code change I guess. [1] maintained at local git? not mainline.. > > [1] > https://github.com/allwinner-zh/bootloader/blob/master/u-boot-2011.09/drivers/mmc/mmc.c#L2220 > [2] > http://thread.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/18442/focus=18480 Well, i don't know how ulf think about this. I want to find the root cause and fix it. If this is sunxi-mmc controller's problem, i think it can be fixed in sunxi-mmc controller. Best Regards, Jaehoon Chung > > Regards, > > yousong > >> Best Regards, >> Jaehoon Chung >> >>>>> >>>>> Signed-off-by: Yousong Zhou <yszhou4t...@gmail.com> >>>>> --- >>>>> drivers/mmc/core/core.c | 4 ++++ >>>>> drivers/mmc/core/sd_ops.c | 5 +++-- >>>>> drivers/mmc/core/sd_ops.h | 10 ++++++++-- >>>>> 3 files changed, 15 insertions(+), 4 deletions(-) >>>>> >>>> >>>> I test this patchset with my already-working sd cards, seems ok. >>>> Actually I don't have a card to test like yours that need retry switch HS, >>>> but from the changes itself, it's harmless to other cards. >>> >>> Thanks for the testing. >>> >>> Those cards normally won't burn out after MMC_CMD_RETRIES access mode switch >>> failures, right? >>> >>>> >>>> so, >>>> >>>> Tested-by: Shawn Lin <shawn....@rock-chips.com> >>>> >>>> BTW, I can't find the cover letter? And another should be clarified, plz >>>> see >>>> comment blow >>>> >>>> >>>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >>>>> index 9ad73f3..e726bb1 100644 >>>>> --- a/drivers/mmc/core/core.c >>>>> +++ b/drivers/mmc/core/core.c >>>>> @@ -468,11 +468,13 @@ static void mmc_wait_for_req_done(struct mmc_host >>>>> *host, >>>>> struct mmc_request *mrq) >>>>> { >>>>> struct mmc_command *cmd; >>>>> + struct mmc_data *data; >>>>> >>>>> while (1) { >>>>> wait_for_completion(&mrq->completion); >>>>> >>>>> cmd = mrq->cmd; >>>>> + data = mrq->data; >>>>> >>>>> /* >>>>> * If host has timed out waiting for the sanitize >>>>> @@ -501,6 +503,8 @@ static void mmc_wait_for_req_done(struct mmc_host >>>>> *host, >>>>> mmc_hostname(host), cmd->opcode, cmd->error); >>>>> cmd->retries--; >>>>> cmd->error = 0; >>>>> + if (data) >>>>> + data->error = 0; >>>> >>>> >>>> What's this change for? >>> >>> sunxi-mmc will set both cmd->error and data->error to -ETIMEDOUT in case of >>> any >>> interrupt error bit was set (related code within >>> `sunxi_finalize_request()'). >>> >>> `__mmc_sd_switch()' thought it was a error case if data->error != 0. >>> >>> So the data->error bit needs to be cleared before next retry. >>> >>> Regards, >>> >>> yousnog >>> >>>> >>>> >>>>> __mmc_start_request(host, mrq); >>>>> } >>>>> >>>>> diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c >>>>> index 48d0c93..22bef3c 100644 >>>>> --- a/drivers/mmc/core/sd_ops.c >>>>> +++ b/drivers/mmc/core/sd_ops.c >>>>> @@ -304,8 +304,8 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) >>>>> return 0; >>>>> } >>>>> >>>>> -int mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>>> - u8 value, u8 *resp) >>>>> +int __mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>>> + u8 value, u8 *resp, int retries) >>>>> { >>>>> struct mmc_request mrq = {NULL}; >>>>> struct mmc_command cmd = {0}; >>>>> @@ -328,6 +328,7 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int >>>>> group, >>>>> cmd.arg &= ~(0xF << (group * 4)); >>>>> cmd.arg |= value << (group * 4); >>>>> cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; >>>>> + cmd.retries = retries; >>>>> >>>>> data.blksz = 64; >>>>> data.blocks = 1; >>>>> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h >>>>> index ffc2305..a53c51e 100644 >>>>> --- a/drivers/mmc/core/sd_ops.h >>>>> +++ b/drivers/mmc/core/sd_ops.h >>>>> @@ -17,9 +17,15 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 >>>>> ocr, u32 *rocr); >>>>> int mmc_send_if_cond(struct mmc_host *host, u32 ocr); >>>>> int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca); >>>>> int mmc_app_send_scr(struct mmc_card *card, u32 *scr); >>>>> -int mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>>> - u8 value, u8 *resp); >>>>> int mmc_app_sd_status(struct mmc_card *card, void *ssr); >>>>> >>>>> +int __mmc_sd_switch(struct mmc_card *card, int mode, int group, >>>>> + u8 value, u8 *resp, int retries); >>>>> +static inline int mmc_sd_switch(struct mmc_card *card, int mode, int >>>>> group, >>>>> + u8 value, u8 *resp) >>>>> +{ >>>>> + return __mmc_sd_switch(card, mode, group, value, resp, 0); >>>>> +} >>>>> + >>>>> #endif >>>>> >>>>> >>>> >>>> >>>> -- >>>> Best Regards >>>> Shawn Lin >>>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >>> the body of a message to majord...@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
