Dr. Syd Kreitzman Your user should own /dev/ttyS0, or better, it should be a member of group uucp that owns /dev/ttyS0. Also you have to see privileges of /var/lock. I don't remember all steps but I think these tips should help you find the way to let dosemu access serial port.
[]s Anderson Pereira Ataides Em Qua 22 Out 2003 23:01, Syd Kreitzman escreveu: > Dear DOSEMU support: > > We are trying to preserve a dos legacy application that utilizes I/O > through a serial port. Attempting to use DOSEMU 1.02 as an ordinary user > (with the appropriate definitions in dosemu.conf i.e. $_com1 = "/dev/ttys0" > ) however does not seem to allow access to the serial port in a Linux > version 9.x installation. Can you advise me what the miminally priveleged > set up is to allow dosemu access to the serial port. Perhaps this is a > combination of Linux and dosemu configurations that I am unaware of. > > Yours Sincerely > > Dr. Syd Kreitzman > MuSR Facility Manager > TRIUMF > > - > To unsubscribe from this list: send the line "unsubscribe linux-msdos" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html