Tasks running in virtual-8086 mode or in protected mode with code
segment descriptors that specify 16-bit default address sizes via the
D bit will use 16-bit addressing form encodings as described in the Intel
64 and IA-32 Architecture Software Developer's Manual Volume 2A Section
2.1.5. 16-bit addressing encodings differ in several ways from the
32-bit/64-bit addressing form encodings: ModRM.rm points to different
registers and, in some cases, effective addresses are indicated by the
addition of the value of two registers. Also, there is no support for SIB
bytes. Thus, a separate function is needed to parse this form of
addressing.
A couple of functions are introduced. get_reg_offset_16() obtains the
offset from the base of pt_regs of the registers indicated by the ModRM
byte of the address encoding. get_addr_ref_16() computes the linear
address indicated by the instructions using the value of the registers
given by ModRM as well as the base address of the segment.
Cc: Dave Hansen <dave.han...@linux.intel.com>
Cc: Adam Buchbinder <adam.buchbin...@gmail.com>
Cc: Colin Ian King <colin.k...@canonical.com>
Cc: Lorenzo Stoakes <lstoa...@gmail.com>
Cc: Qiaowei Ren <qiaowei....@intel.com>
Cc: Arnaldo Carvalho de Melo <a...@redhat.com>
Cc: Masami Hiramatsu <mhira...@kernel.org>
Cc: Adrian Hunter <adrian.hun...@intel.com>
Cc: Kees Cook <keesc...@chromium.org>
Cc: Thomas Garnier <thgar...@google.com>
Cc: Peter Zijlstra <pet...@infradead.org>
Cc: Borislav Petkov <b...@suse.de>
Cc: Dmitry Vyukov <dvyu...@google.com>
Cc: Ravi V. Shankar <ravi.v.shan...@intel.com>
Cc: x...@kernel.org
Signed-off-by: Ricardo Neri <ricardo.neri-calde...@linux.intel.com>
---
arch/x86/lib/insn-eval.c | 155 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 155 insertions(+)
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index 9822061..928a662 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -431,6 +431,73 @@ static int get_reg_offset(struct insn *insn, struct
pt_regs *regs,
}
/**
+ * get_reg_offset_16 - Obtain offset of register indicated by instruction
+ * @insn: Instruction structure containing ModRM and SiB bytes
+ * @regs: Structure with register values as seen when entering kernel mode
+ * @offs1: Offset of the first operand register
+ * @offs2: Offset of the second opeand register, if applicable.
+ *
+ * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte
+ * within insn. This function is to be used with 16-bit address encodings. The
+ * offs1 and offs2 will be written with the offset of the two registers
+ * indicated by the instruction. In cases where any of the registers is not
+ * referenced by the instruction, the value will be set to -EDOM.
+ *
+ * Return: 0 on success, -EINVAL on failure.
+ */
+static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs,
+ int *offs1, int *offs2)
+{
+ /* 16-bit addressing can use one or two registers */
+ static const int regoff1[] = {
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, bx),
+ };
+
+ static const int regoff2[] = {
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ -EDOM,
+ -EDOM,
+ -EDOM,
+ -EDOM,
+ };
+
+ if (!offs1 || !offs2)
+ return -EINVAL;
+
+ /* operand is a register, use the generic function */
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ *offs1 = insn_get_modrm_rm_off(insn, regs);
+ *offs2 = -EDOM;
+ return 0;
+ }
+
+ *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)];
+ *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)];
+
+ /*
+ * If no displacement is indicated in the mod part of the ModRM byte,
+ * (mod part is 0) and the r/m part of the same byte is 6, no register
+ * is used caculate the operand address. An r/m part of 6 means that
+ * the second register offset is already invalid.
+ */
+ if ((X86_MODRM_MOD(insn->modrm.value) == 0) &&
+ (X86_MODRM_RM(insn->modrm.value) == 6))
+ *offs1 = -EDOM;
+
+ return 0;
+}
+
+/**
* get_desc() - Obtain address of segment descriptor
* @sel: Segment selector
*
@@ -689,6 +756,94 @@ int insn_get_modrm_rm_off(struct insn *insn, struct
pt_regs *regs)
}
/**
+ * get_addr_ref_16() - Obtain the 16-bit address referred by instruction
+ * @insn: Instruction structure containing ModRM byte and displacement
+ * @regs: Structure with register values as seen when entering kernel mode
+ *
+ * This function is to be used with 16-bit address encodings. Obtain the memory
+ * address referred by the instruction's ModRM bytes and displacement. Also,
the
+ * segment used as base is determined by either any segment override prefixes
in
+ * insn or the default segment of the registers involved in the address
+ * computation. In protected mode, segment limits are enforced.
+ *
+ * Return: linear address referenced by instruction and registers on success.
+ * -1L on failure.
+ */
+static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs)
+{
+ unsigned long linear_addr, seg_base_addr, seg_limit;
+ short eff_addr, addr1 = 0, addr2 = 0;
+ int addr_offset1, addr_offset2;
+ int ret;
+
+ insn_get_modrm(insn);
+ insn_get_displacement(insn);
+
+ /*
+ * If operand is a register, the layout is the same as in
+ * 32-bit and 64-bit addressing.
+ */
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ addr_offset1 = get_reg_offset(insn, regs, REG_TYPE_RM);
+ if (addr_offset1 < 0)
+ goto out_err;
+ eff_addr = regs_get_register(regs, addr_offset1);
+ seg_base_addr = insn_get_seg_base(regs, insn, addr_offset1);
+ if (seg_base_addr == -1L)
+ goto out_err;
+ seg_limit = get_seg_limit(regs, insn, addr_offset1);
+ } else {
+ ret = get_reg_offset_16(insn, regs, &addr_offset1,
+ &addr_offset2);
+ if (ret < 0)
+ goto out_err;
+ /*
+ * Don't fail on invalid offset values. They might be invalid
+ * because they cannot be used for this particular value of
+ * the ModRM. Instead, use them in the computation only if
+ * they contain a valid value.
+ */
+ if (addr_offset1 != -EDOM)
+ addr1 = 0xffff & regs_get_register(regs, addr_offset1);
+ if (addr_offset2 != -EDOM)
+ addr2 = 0xffff & regs_get_register(regs, addr_offset2);
+ eff_addr = addr1 + addr2;
+ /*
+ * The first register is in the operand implies the SS or DS
+ * segment selectors, the second register in the operand can
+ * only imply DS. Thus, use the first register to obtain
+ * the segment selector.
+ */
+ seg_base_addr = insn_get_seg_base(regs, insn, addr_offset1);
+ if (seg_base_addr == -1L)
+ goto out_err;
+ seg_limit = get_seg_limit(regs, insn, addr_offset1);
+
+ eff_addr += (insn->displacement.value & 0xffff);
+ }
+
+ linear_addr = (unsigned long)(eff_addr & 0xffff);
+
+ /*
+ * Make sure the effective address is within the limits of the
+ * segment. In long mode, the limit is -1L. Thus, the second part
+ * of the check always succeeds.
+ */
+ if (linear_addr > seg_limit)
+ goto out_err;
+
+ linear_addr += seg_base_addr;
+
+ /* Limit linear address to 20 bits */
+ if (v8086_mode(regs))
+ linear_addr &= 0xfffff;
+
+ return (void __user *)linear_addr;
+out_err:
+ return (void __user *)-1;
+}
+
+/**
* _to_signed_long() - Cast an unsigned long into signed long
* @val A 32-bit or 64-bit unsigned long
* @long_bytes The number of bytes used to represent a long number
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
