We are running with a Cyclades Ze system without problem.
I use mgetty -D -x2 /dev/ttyCxx in /etc/inittab without problem.
I seem to remember that you use USR couriers... Is that correct?
If so remember to switch the Rx/Tx switch...
Regards,
Bruce.
Melbourne.
> Hello,
>
> Does anyone know of any port number limitations that a Cyclades driver has
> under linux ?
>
> We have a test machine that we're trying to get going with 32 ports using a
> Cyclades Ye host card and 2 16 Port Serial modules.
>
> However, we just cant seem to init a particular modem - we've changed the
> physical modem, serial cable, power supply and all, but, the logs are
> suggesting the modem is timing out on init.
>
> The TR lights on the modem lights for a while whilst its trying to init but
> goes off after around 20 seconds.
>
> We have compiled the latest Cyclades drivers into a 2.0.33 and 2.0.27
> kernel.
>
> Any help much appreciated.
>
> Regards
>
> adam
>
>
> ------------------------------------------------
> IPAX Systems
> Melbourne, Australia
> National Systems Manager
> Ops Tel: 1800 894 894
> Ops Fax: 03 - 9801-8533
> Web Site http://www.ipax.com.au
> ------------------------------------------------
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
