I'm new at ethernet'ing. I found an old SMC Elite16 board and installed
it in my Linux box. I can't get Linux to recognize this board. Does
Linux even support this board? I'm running 2.0.34.
I'm loading the smc9194 driver via rc.modules. I assume this is the
correct driver?
ifconfig doesn't show anything concering eth0. As far as I can tell the
board is set to use IRQ 7. An entry for 7 does not show up in
/proc/interrupts.
Running dmesg shows me only these two pertinent (I believe) messages:
SMC9194: You shouldn't use auto-probing with insmod! (I don't understand
what this message means.)
and
loading device 'eth0' ...
There are no other messages whether the load was successful or not.
Can someone help?
Marshall Lake - [EMAIL PROTECTED] - http://melake.erols.com
http://melake.erols.com/~the-beach http://melake.erols.com/~genealogy
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
