You may want to check out http://cesdis1.gsfc.nasa.gov/linux/drivers/
------------------------------------------------------
On Mon, 12 Apr 1999, Marshall Lake wrote:
>I'm new at ethernet'ing. I found an old SMC Elite16 board and installed
>it in my Linux box. I can't get Linux to recognize this board. Does
>Linux even support this board? I'm running 2.0.34.
>
>I'm loading the smc9194 driver via rc.modules. I assume this is the
>correct driver?
>
>ifconfig doesn't show anything concering eth0. As far as I can tell the
>board is set to use IRQ 7. An entry for 7 does not show up in
>/proc/interrupts.
>
>Running dmesg shows me only these two pertinent (I believe) messages:
>SMC9194: You shouldn't use auto-probing with insmod! (I don't understand
>what this message means.)
>and
>loading device 'eth0' ...
>
>There are no other messages whether the load was successful or not.
>
>Can someone help?
>
>
>Marshall Lake - [EMAIL PROTECTED] - http://melake.erols.com
>http://melake.erols.com/~the-beach http://melake.erols.com/~genealogy
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-net" in
>the body of a message to [EMAIL PROTECTED]
--------------------------------------------------------
Regards,
HO Soo-Khim
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
