I just finished a project using 4 of the D-link 4 port ethernet cards. They are tulip based and other than patching the kernel to the latest rev of the driver they worked without a hitch. BTW I found out if you want more than 16 eth devices you do have to patch your kernel as well. Regards Phil Z. Anton Ivanov wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > Hi list, > Sorry for asking the following dumb question but I could not dig out > anything reasonable from the web and the list archive. > > Has anybody dealt with the newest Adaptec Quad Ethernet adapters (ANA > 62044 Four-Port). > The older ones (ANA-6944A/TX) used to be just a set of four tulips and > they were working pretty well. > > In btw: Adaptec (nothing unusual) just quoted their web page literally bragging > about NT and Novell. So much for all the PR they got at linux-expo. > > - ---------------------------------- > Anton R. Ivanov > IP Engineer Level3 Communications > RIPE: ARI2-RIPE E-Mail: Anton Ivanov <[EMAIL PROTECTED]> > - ---------------------------------- > > -----BEGIN PGP SIGNATURE----- > Version: 2.6.3ia > Charset: noconv > > iQEVAwUBOASDQilWAw/bM84zAQH5Uwf6AmCMxKPSeznUBdHG3GgaZLHwcklfv/N/ > KRRZVMcF3vOhqqEpBBqCzKBpdK2VZBVju2K3pZy+3TsWoyiP37GQWMbEZCl6PPL1 > eWOYMgIx9lazhFi4XKyBWqKyyBrXj+LN9wbmrFRjmdu9Fz9xU7V6R9J3YxH0SGdL > EjJDi9YAZjudYVwvIPXDsoVP4sKNidjTMZeB/XV3xkEimndaACEVe2SCstd1ssob > 3v5uBxGuoRF2gQfPPWn344qMXzcHmAkBygcqqQGPetZEa6AYWVSNO0UyYIRsvaZw > zzoGPPXU3bXOXbjkb5IpP+1SiLMPwky6JiFXPyGWm3zf7aP9yr/7gQ== > =CvWk > -----END PGP SIGNATURE----- > - > To unsubscribe from this list: send the line "unsubscribe linux-net" in > the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
