Hello,
i�m trying to get up following configuration: We have two
offices connected via two 3Com Netbuilder RemoteOffice Router
over a 64K ISDN leased line. There are several unix machines
in the second network, e.g. a DG Aviion running DG/UX, which
can be accessed fine from the first network all the time.
Now we installed a RH6.0 linux box in the second network.
Opening a telnet-session from the first network succeeds,
but on "fast" output (e.g. browsing through a large file
with "less" while hitting the up / down buttons very fast)
the connection hangs. Trying to reach the apache-server
on the RH6.0 box results in a connection loss after a few
transferred Bytes. Apache logs the hit correctly, no errors.
"netstat -t" shows an established connection, after some
time it changes state to "FIN_WAIT1", and so on till the
system closes the connection. Sending a file to the box
from remote via FTP results in a newly created but empty
File on the RH6.0 - Box - the client shows some transfered
blocks and then the connection hangs.
There are no errors on the interface, no error in any logfile.
Accessing the box within it�s LAN works fine.
I�ve tried both kernel 2.2.5 and kernel 2.2.12 on the
box - no change. I�ve now placed a second box there
running RH6.1 - same result, connection hangs if accessed
from remote. I�ve tried Windows & Unix Clients - same bad
result.
Has anybody any idea?
--
Helmut Wirth
[EMAIL PROTECTED]
-------------------------------------------------------------
bison GmbH phone +49 89 / 50 03 91-14
Ridlerstr. 11 fax +49 89 / 50 03 91-17
D-80339 Muenchen http://www.bison-soft.de/
-------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
