I have linux running on my Vaio N505VE and it looks great! Problem is I
now want to take it online and am having problems with the built-in
modem. According to Windoze, the modem is com2 (IRQ 3, 0x2f8). When I
made a link from /dev/modem to /dev/ttyS1, setserial then gives me the
following:
/dev/modem, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000, closing_wait2: infinte
Flags: spd_normal skip_test
which seems correct, when I then use minicom, it immediately reports my
session status as "online" and kde's PPP utility says that "the modem is
busy"
In minicom I have tried using both hardware flow control and XONXOFF,
with no effect.
Any ideas?
Thanks
---Raymond
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
