(I apologize if this ends up as a duplicate post; I sent it but haven't seen it come back from the list) I have linux running on my Vaio N505VE and it looks great! Problem is I now want to take it online and am having problems with the built-in modem. According to Windoze, the modem is com2 (IRQ 3, 0x2f8). When I made a link from /dev/modem to /dev/ttyS1, setserial then gives me the following: /dev/modem, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000, closing_wait2: infinte Flags: spd_normal skip_test which seems correct, when I then use minicom, it immediately reports my session status as "online" and kde's PPP utility says that "the modem is busy" In minicom I have tried using both hardware flow control and XONXOFF, with no effect. Any ideas? Thanks ---Raymond - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
