hi,
i got the software libpcap (0.4) downloaded from net.
to install it ,u have got to run ./configure (which got executed properly)
.but when i did make ,it gave me errors which i have attached in file gg
.i am also sending the Makefile.in file .
i am using red-hat linux (6.0)platform.
can anybody help me to install libpcap properly.
Gaurav.Rajput
<[EMAIL PROTECTED]>
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1
-DHAVE_STRERROR=1 -DHAVE_NET_IF_ARP_H=1 -c /home/guest/pro_an/libpcap-0.4/
/bpf_filter.c
# Copyright (c) 1993, 1994, 1995, 1996
# The Regents of the University of California. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that: (1) source code distributions
# retain the above copyright notice and this paragraph in its entirety, (2)
# distributions including binary code include the above copyright notice and
# this paragraph in its entirety in the documentation or other materials
# provided with the distribution, and (3) all advertising materials mentioning
# features or use of this software display the following acknowledgement:
# ``This product includes software developed by the University of California,
# Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
# the University nor the names of its contributors may be used to endorse
# or promote products derived from this software without specific prior
# written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
# @(#) $Header: Makefile.in,v 1.72 97/06/30 13:56:14 leres Exp $ (LBL)
#
# Various configurable paths (remember to edit Makefile.in, not Makefile)
#
# Top level hierarchy
prefix = p #@prefix@
exec_prefix = e #@exec_prefix@
# Pathname of directory to install the include files
INCLDEST = /home/guest/pro_an/libpcap-0.4/ #@includedir@
# Pathname of directory to install the library
LIBDEST = /home/guest/pro_an/libpcap-0.4/ #@libdir@
# Pathname of directory to install the man page
MANDEST = /home/guest/pro_an/libpcap-0.4/ #@mandir@
# VPATH
srcdir = /home/guest/pro_an/libpcap-0.4/ #@srcdir@
VPATH = /home/guest/pro_an/libpcap-0.4/ #@srcdir@
#
# You shouldn't need to edit anything below.
#
CC = @CC@
CCOPT = @V_CCOPT@
INCLS = -I. @V_INCLS@
DEFS = @DEFS@
# Standard CFLAGS
CFLAGS = $(CCOPT) $(INCLS) $(DEFS)
INSTALL = @INSTALL@
RANLIB = @V_RANLIB@
#
# Flex and bison allow you to specify the prefixes of the global symbols
# used by the generated parser. This allows programs to use lex/yacc
# and link against libpcap. If you don't have flex or bison, get them.
#
LEX = @V_LEX@
YACC = @V_YACC@
# Explicitly define compilation rule since SunOS 4's make doesn't like gcc.
# Also, gcc does not remove the .o before forking 'as', which can be a
# problem if you don't own the file but can write to the directory.
.c.o:
@rm -f $@
$(CC) $(CFLAGS) -c $(srcdir)/$*.c
PSRC = pcap-@[email protected]
CSRC = pcap.c inet.c gencode.c optimize.c nametoaddr.c \
etherent.c savefile.c bpf_filter.c bpf_image.c
GENSRC = scanner.c grammar.c version.c
SRC = $(PSRC) $(CSRC) $(GENSRC)
# We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
# hack the extra indirection
OBJ = $(PSRC:.c=.o) $(CSRC:.c=.o) $(GENSRC:.c=.o)
HDR = pcap.h pcap-int.h pcap-namedb.h pcap-nit.h pcap-pf.h \
ethertype.h gencode.h gnuc.h
GENHDR = \
tokdefs.h
TAGHDR = \
bpf/net/bpf.h
TAGFILES = \
$(SRC) $(HDR) $(TAGHDR)
CLEANFILES = $(OBJ) libpcap.a $(GENSRC) $(GENHDR) lex.yy.c
all: libpcap.a
libpcap.a: $(OBJ)
@rm -f $@
ar rc $@ $(OBJ)
$(RANLIB) $@
scanner.c: $(srcdir)/scanner.l
@rm -f $@
$(LEX) -t $< > $$$$.$@; mv $$$$.$@ $@
scanner.o: scanner.c tokdefs.h
tokdefs.h: grammar.c
grammar.c: $(srcdir)/grammar.y
@rm -f grammar.c tokdefs.h
$(YACC) -d $<
mv y.tab.c grammar.c
mv y.tab.h tokdefs.h
grammar.o: grammar.c
@rm -f $@
$(CC) $(CFLAGS) -Dyylval=pcap_lval -c grammar.c
version.o: version.c
version.c: $(srcdir)/VERSION
@rm -f $@
sed -e 's/.*/char pcap_version[] = "&";/' $(srcdir)/VERSION > $@
install: force
$(INSTALL) -m 444 -o bin -g bin libpcap.a $(DESTDIR)$(LIBDEST)/libpcap.a
$(RANLIB) $(DESTDIR)$(LIBDEST)/libpcap.a
install-incl: force
$(INSTALL) -m 444 -o bin -g bin $(srcdir)/pcap.h \
$(DESTDIR)$(INCLDEST)/pcap.h
$(INSTALL) -m 444 -o bin -g bin $(srcdir)/pcap-namedb.h \
$(DESTDIR)$(INCLDEST)/pcap-namedb.h
$(INSTALL) -m 444 -o bin -g bin $(srcdir)/net/bpf.h \
$(DESTDIR)$(INCLDEST)/net/bpf.h
install-man: force
$(INSTALL) -m 444 -o bin -g bin $(srcdir)/pcap.3 \
$(DESTDIR)$(MANDEST)/man3/pcap.3
clean:
rm -f $(CLEANFILES)
distclean:
rm -f $(CLEANFILES) Makefile config.cache config.log config.status \
gnuc.h os-proto.h bpf_filter.c net
tags: $(TAGFILES)
ctags -wtd $(TAGFILES)
tar: force
@cwd=`pwd` ; dir=`basename $$cwd` ; name=libpcap-`cat VERSION` ; \
list="" ; tar="tar chFFf" ; \
for i in `cat FILES` ; do list="$$list $$name/$$i" ; done; \
echo \
"rm -f ../$$name; ln -s $$dir ../$$name" ; \
rm -f ../$$name; ln -s $$dir ../$$name ; \
echo \
"(cd .. ; $$tar - [lots of files]) | compress > /tmp/$$name.tar.Z" ; \
(cd .. ; $$tar - $$list) | compress > /tmp/$$name.tar.Z ; \
echo \
"rm -f ../$$name" ; \
rm -f ../$$name
force: /tmp
depend: $(GENSRC) force
./mkdep -c $(CC) $(DEFS) $(INCLS) $(SRC)
