The "passive" parameter deals with authentication not with his problem.
He is getting the "serial line is not eight bits clean" message which
indicates that Linux is seeing characters echoed back to itself. Thus
ppp/chat never sees the correct sequence of events occuring during
dialup/logon.
-JMS
-----Original Message-----
From: Mark Walter [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 16, 2000 8:49 AM
To: Jose M. Sanchez
Cc: [EMAIL PROTECTED]
Subject: RE: [expert] PPPd and ISDN
Hi,
> > Normally this means your modem is set to echo command characters...
> > You need to turn this off.
> May 16 09:58:20 gkar pppd[743]: Serial connection established.
> May 16 09:58:20 gkar pppd[743]: Using interface ppp0
> May 16 09:58:20 gkar pppd[743]: Connect: ppp0 <--> /dev/ttyS0
> May 16 09:58:51 gkar pppd[743]: LCP: timeout sending Config-Requests
Not sure if this is the right list but setting 'passive' in
/etc/ppp/options could help.
cu
Mark Walter
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
