just an FYI.
machine died again today. heavy network load. sending out 2 large mail
lists, with lots of web traffic and a few quake servers running. this is
using the 1.20.2.10, which is the latest AFAIK. No messages like the ones
Adrey sent below appeared in the logs. Did I mention this is an SMP
server? Would that make a difference?
Any help would be great.
thanx
s
--On Friday, June 9, 2000 2:51 PM -0400 "Scott R. Every" <[EMAIL PROTECTED]>
wrote:
> I saw none of these errors in any of my logs. Here is my syslog.conf. I
> think its right, but let me know if i should add anything:
> *.=info;*.=notice /usr/adm/messages
> *.=debug /usr/adm/debug mail.err
> /dev/console
> mail.debug /var/log/maillog
> *.warn /usr/adm/syslog
> *.err /usr/adm/syslog
>
> s
>
>
> --On Friday, June 9, 2000 9:24 AM -0400 "Scott R. Every" <[EMAIL PROTECTED]>
> wrote:
>
>>> The points important for diagnostic are:
>>> - Do you see messages "can't fill rx buffer"?
>>> These messages mean that the driver experience allocation failures
>>> because of high load creating high memory pressure.
>>> - Do you see messages "card reports no RX buffers (no resources)"?
>>> These messages mean that the card realize receive buffer shortage,
>>> too. - When the driver manages to allocate buffers again, it issues
>>> message "restart the receiver after a possible hang". It should appear
>>> after the above messages.
>>> The things may be complicated by the fact that the receiver hang may be
>>> followed by an unreasonable transmitter hang.
>
>
>
> --
> Scott R. Every - mailto:[EMAIL PROTECTED]
> EMJ Internet - http://www.emji.net
> voice : 1-888-258-8959 fax : 1-919-363-4425
--
Scott R. Every - mailto:[EMAIL PROTECTED]
EMJ Internet - http://www.emji.net
voice : 1-888-258-8959 fax : 1-919-363-4425
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
