Hi Anshu. > unfortunately i dont think WinXP recognises FAT32 system. it requires > NTFS and i can't create NTFS type partition using dos's fdisk!
All I know is, it installed as an UPGRADE to my Win98SE system that was installed in a FAT32 partition, so the installer at least understands FAT32 partitions, and that's all that matters. If it needs NTFS partitions then it will create them itself. Also, I specifically stated to use Linux fdisk because dos's fdisk can't create ext2 partitions for Linux and you need to create them BEFORE you install WinXP in my experience. I know from experience that Linux fdisk is capable of creating ANY type of partition, although it can't always format them. However, in my experience, it's best to let each OS format its own partitions, so that isn't a limitation. Best wishes from Riley. ========================================================================= >>>>> btw I used Partition Magic from WinXP to partition the disc as I >>>>> dont know how to work around using fdisk in Linux. >> >> In the process, you probably caused this problem, and my advice >> would be to scrap PartitionMagic and redo your system completely. >> Here's the procedure I use to set up a system to dual-boot WIndows >> (any version) and Linux: >> >> 1. Use the Linux fdisk to create the partitioning scheme I want. >> In my experience, NONE of the Windows-based partitioning >> software can correctly create partitions for Linux, and this >> includes PartitionMagic. >> >> This is the partition layout I generally use: >> >> Partition Type Cylinders Notes >> >> /dev/hda1 Swap 254 Anti-virus measure >> /dev/hda2 ext2 2 Mounted as /boot under Linux >> /dev/hda3 FAT32 50% C: under Windows >> /dev/hda4 ext2 Rest Mounted as / under Linux >> >> The allocation of /dev/hda1 as the swap partition is because of >> the number of Windows viruses that overwrite the first so many >> Megabytes of the primary hard drive. Since there is nothing of >> importance in a Linux swap partition when Windows is running, >> this measure prevents those viruses from overwriting anything >> other than the partition table, and that is relatively easy to >> recreate. >> >> 2. Install one's favourite dialect of Windows into /dev/hda3 that >> was reserved for it in the above partition table. This writes >> the correct MBR record out, and marks /dev/hda3 as the bootable >> partition. >> >> 3. Install one's favourite Linux distribution specifying the mount >> points as listed above, and placing the boot loader in the boot >> record of /dev/hda2 and NOT in the MBR. >> >> 4. Use fdisk to set /dev/hda2 as the bootable partition. Either the >> Linux or Windows fdisk can be used for this without problems. >> >> Every distribution of Linux I've met auto-detects that Windows is >> installed and automatically sets up the boot loader correctly. >> >> Incidentally, the reason for putting the Linux boot loader in the >> boot sector of the /boot mount is because Windows has a habit of >> overwritingthe MBR with its own boot loader, although it respects >> the boot marker when doing so. >> >>> Thanks for the response, but the problem is that with the partition >>> shown below i am never able to boot using linux. so i cant edit the >>> lilo.conf. or shud i change partition 1 (/dev/hda1) to type ext2 >>> from current vfat. coz that was the only way i cud boot into linux? >> >> Before you do anything, you need to decide precicely what each >> partitioncontains. The partition layout shown, taken together with >> your comments, idnicates that the /boot mount point is probably >> /dev/hda1 rather than the /dev/hda6 indicated, and this is probably >> PartitionMagic's work. >> >>>>> I want to have both WinXP and Linux (RHL7.3) on my system but >>>>> am having trouble with the partitions. My partition table (i >>>>> dunno whether thats the correct term) looks like this (as shown >>>>> by linux installer ) - >>>>> >>>>> Start End Size(MB) Type Mount point >>>>> /dev/hda >>>>> Free 1 1 8 Free >>>>> /dev/hda1 2 7 47 vfat >>>>> /dev/hda2 8 708 5499 NTFS >>>>> /dev/hda3 709 2432 13523 Extended >>>>> /dev/hda5 709 1413 5530 NTFS >>>>> /dev/hda6 1414 1419 47 ext2 /boot >>>>> /dev/hda7 1420 1453 267 swap >>>>> /dev/hda8 1454 2432 7697 ext2 / >>>>> >>>>> the error message i get is -> Boot partition may not meet booting >>>>> constraints for your architecture. Creation of boot disk is >>>>> highly encouraged. >>>> >>>> Thats not an error message but a warning from the install process, >>>> as you see lilo or grub was installed. >>>> >>>>> The options I get is "modify partition" and "add anyway". If I >>>>> proceed with 'add anyway' option installation is succesful but I >>>>> dont get the option of selecting the OS for booting the PC and >>>>> the PC boots using WinXP. I tried changing the /dev/hda1 partition >>>>> to ext2 ,mount pt /boot. The installation was succesful and so >>>>> was the boot, but then the option of starting with WinXP >>>>> dissapeared. I could only boot with Linux Can anyone help me out? - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
