At 11:31 AM 12/29/2004 -0500, Eve Atley wrote:
We recently purchased a Maxtor External Hard Drive 250gb OneTouchII. We were considering using this to backup data on our RedHat Linux 9 fileserver, hooking it directly to this fileserver. One unrelated issue is that the usb is probably 1.1 while specs are 2.0, though the drive does say it's 1.1 compatible. Second, what issues do we need to resolve in order for a. the Linux box to read the drive, and b. formatting the unformatted external drive to work with the Linux box?
Eve -- I waited a bit before replying, in the hope that someone with more specific knowledge than I can offer would turn up. My own experience with USB drives is limited to flash drives (those little keychain thingies). But I suspect that the issues for these USB hard disks are the same, so I'll tell you what I know in the hope that you will find it helpful.
First, to mount and read the drive, you need a few things set in your kernel. (This is for 2.4.x kernels; if you use 2.6.x, the details may differ a bit.)
USB Storage -> Support for USB -> USB mass storage support
needs to be enabled (in kernel or loaded as a module)
In this area, you probably also want to enable
USB Storage -> Support for USB ->Preliminary USB device filesystem
USB drives are mounted as scsi drives, so basic scsi drive support needs to me provided, either in kernel or loaded as a set of modules (two, as I recall). Abd you need the /dev pseudofile entries for scsi devices, probably just /dev/sda and /dev/sda*
an appropriate filesystem driver needs to be loaded, in the kernel or as a module; ext2 works fine.
Second, once you have all that set up, you should be able to use the usual tools to set up your USB drive. It will (probably; I don't know your setup) show up as /dev/sda, so you can fdisk that device to set up your partitions, then mkfs.ext2 whatever partitions you choose to set up, then use whatever you are used to using (cp, tar, whatever) to do the actual backups.
Third, one thing Linux is never very smart about is noticing when mounted filesystems are removed. You'll want to be careful to umount any filesystems on this drive before you disconnect it. (The USB stuff itself is fine about noticing the connection and disconnection of USB devices.) And ... this was probably obvious ... you need to umount the partitions after you connect the device.
Last, the only likely issue your use of USB 1.1 will raise is speed of packups. If that proves to be an issue for you, and your server is an i86 system, you might want to spend the US$10 or so for a PCI card that provides USB 2.0.
As I said at the outset, I haven't actually used these drives myself, so I'm extrapolating hee from my experiences with USB flash. If I've gotten some details wrong, I do hope that someone will spot them and post a correction.
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004
- To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
