> Minicom normally displays a version message, and initializes the modem.
> At this point you are free to type AT commands.
Minicom places a little box on the screen and says initializing modem.
However the modem does not make a sound - it should
When I type anything Minicom ignores it, if I turn on echo I see it on
the screen but the commands have no effect.
> You might want to check your IRQ and port configurations using the
> setserial command, sounds to me like you might have some kind of an IRQ
> conflict there....
the output for setserial is 16550A 0x02f8 irq:3 the same as in win95,
when I cat /proc/interrupts irq 3 is free - not listed.
>
> --
> //\/\ario //\/\elendez- TI2DLL
> ICQ #6160213
> [EMAIL PROTECTED]
> http://radioplaneta.base.org
> My other PC's a Linux box :)
--
If you don't stand for something, you'll fall for anything
17728385
- PUBLIC ENEMY
RH5
