According to Ailwyn Burgess: While burning my CPU.
>
> All
>
> I'm having a hard time configuring networking on my Linux box (RH 5.2 kernel
> 2.0.36, AMD K2-350, 64MB). More specifically getting the Tulip module to
> load for eth0. I have an Accton Cheetah (EN1207D-TX) PCI NIC, which is
> jumperless plug n play. I know from the BIOS info shown at boot up that it
> uses IRQ 9, but I need to know the Base i/o address to load the module. My
> question is, has anyone managed to get this particular adapter working with
> linux (if so any hints on the base i/o address would be helpful) or can
> anyone suggest a way of finding out the Base I/O address.
What happens when you simply do;
modprobe tulip
If the driver is like many others it will probe for the card.
If that is of no help. read
/usr/src/linux/Documentation/networking/tulip.txt it could be that your card
needs another driver, its all metioned in that file.
Of course i dont have your type of card so i can only "point" you to
documentation.
>
> TIA
>
> Ailwyn
>
--
Regards Richard.
[EMAIL PROTECTED]
