Hello, I've installed RedHat 5.1 this evening
and startx ends with an error message.
I'm including the startx.out file here in case any
one can find what I need to change.
Thanks for your help.
Jon Dowd - Ashland, Oregon
- USA
+++ +++ +++ +++ +++ +++ +++ +++
XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.33 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.33 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: ps/2, device: /dev/mouse, buttons: 3
(**) S3V: Graphics device ID: "ViRGE/DX or /GX"
(**) S3V: Monitor ID: "My Monitor"
(--) S3V: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3V: Invalid vertical timing for mode "400x300". Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xe0000000
(--) S3V: chipset: ViRGE/DX rev. 1
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram: 4096k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 69.801 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: Mode "640x480": mode clock = 25.175
(--) S3V: Using 6 bits per RGB value
(--) S3V: videoram usage reduced to 2560k to avoid co-ord overflow
(--) S3V: Virtual resolution set to 640x480
(--) S3V: Local bus LAW is 0xE00xxxxx
(--) S3V: Using a banksize of 2560k, line width of 640
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: ps/2, device: /dev/mouse, buttons: 3
(**) S3V: Graphics device ID: "ViRGE/DX or /GX"
(**) S3V: Monitor ID: "My Monitor"
(--) S3V: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3V: Invalid vertical timing for mode "400x300". Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xe0000000
(--) S3V: chipset: ViRGE/DX rev. 1
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram: 4096k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 69.801 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: Mode "640x480": mode clock = 25.175
(--) S3V: Using 6 bits per RGB value
(--) S3V: videoram usage reduced to 2560k to avoid co-ord overflow
(--) S3V: Virtual resolution set to 640x480
(--) S3V: Local bus LAW is 0xE00xxxxx
(--) S3V: Using a banksize of 2560k, line width of 640
Fatal server error:
Caught signal 11. Server aborting
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno =
111
giving up.
giving up.
xinit: Connection refused (errno 111):
unable to connect to X server
xinit: No such process (errno 3):
Server error.