On Sun, 11 Jun 2000, James (Jim) Hatridge wrote about, SCSI Error:
> Hi all,
>
> I've got an AHA-1542B SCSI controller with an old MAXTOR ST-8760s HD. I
> know that the HD works. When I fire up the computer I get this
>
> Checking for SCSI target 0 lun 0
> SCSI Target = lun0 Installed as dr C:
> Checkin for SCSI target 1 lun 0
>
> FDC Failure
> Press F1 to resume
Now i dont know what the error is, however i do see many differenaces
compared to what i see at bootime from my SCSI adaptor and disk.
I see;
(scsi0) <Adaptec AHA-2944 Ultra SCSI host adapter> found at PCI 15/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 413 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4
<Adaptec AHA-2944 Ultra SCSI host adapter>
Now i belive you should also see something like the above.
However i am talking linux, could it be that your error is coming from the
bios because you have not setup the scsi bios correctly.??
I think its better to wait and see if you can shed some more light on this,
before i go futher with explainging howto do it under linux.
> ---------------------------
>
> Any ideas what to do? BTW this is the first time I've worked with SCSI.
>
>
> THANKS!
>
> Jim Hatridge
> [EMAIL PROTECTED]
> Proud Linux User #88484
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
