FDC = Floppy Disk Controller . Check what the BIOS thinks you have installed
in the way of floppy drives; if it is wrong, correct it. Or see if you have
2 FDCs enabled -- the one on teh m'bd (or the IDE controller) and the one on
the Adaptec -- if so, disable the appropriate one.
At 01:58 PM 6/11/00 +0200, James (Jim) Hatridge wrote:
>
>Hi all,
>
>I've got an AHA-1542B SCSI controller with an old MAXTOR ST-8760s HD. I
>know that the HD works. When I fire up the computer I get this
>
>Checking for SCSI target 0 lun 0
>SCSI Target = lun0 Installed as dr C:
>Checkin for SCSI target 1 lun 0
>
>FDC Failure
>Press F1 to resume
>---------------------------
>
>Any ideas what to do? BTW this is the first time I've worked with SCSI.
------------------------------------"Never tell me the odds!"---
Ray Olszewski -- Han Solo
Palo Alto, CA [EMAIL PROTECTED]
----------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
