On Sun, 06 Aug 2000, Dances with Turtles wrote about, Repost of: module problem:
can't load tulip.o with linksys 10/100lnetx V4.1 card:
>
> Well, I hope that I said everything that needs to be said. I'll repeat
> for the sake that it might help, that my
> system "was" working with the ISA Ether16 from Linksys and that this
> 100LNETX is Version 4.1, their newest.
> Perhaps there is something that I'm forgetting to remove regarding my
> old card? I've looked at the /etc/modules.conf, and even at
> /etc/sysconfig/... (shouldn't be anything in there regarding hardware.)
Your BIOS is the problem, you mentioned you checked it, i would do it again
as this problem is a regular one when folks step from ISA to PCI.
Goto;
http://www.linksys.com/faqs/
Click on "Linux support"
BTW:
A good idea would be to use the distribution kernel 2.2.14-5.0 it has the
module so you dont need to compile your own kernel, after you have it
working you can then compile a custom kernel to suit your needs.
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
