* Paul Walmsley <[EMAIL PROTECTED]> [080925 17:40]: > > When a non-CORE DPLL is enabled via omap3_noncore_dpll_enable(), use > the user's desired rate in clk->rate to determine whether to put the > DPLL into bypass or lock mode, rather than reading the DPLL's current > idle state from its hardware registers. > > This fixes a bug observed when leaving retention. Non-CORE DPLLs were > not being relocked when downstream clocks re-enabled; rather, the DPLL > entered bypass mode. > > Problem reported by Tero Kristo <[EMAIL PROTECTED]>.
Pushing. Tony > Signed-off-by: Paul Walmsley <[EMAIL PROTECTED]> > --- > arch/arm/mach-omap2/clock34xx.c | 4 +--- > 1 files changed, 1 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c > index c89d6bc..df258f7 100644 > --- a/arch/arm/mach-omap2/clock34xx.c > +++ b/arch/arm/mach-omap2/clock34xx.c > @@ -281,9 +281,7 @@ static int omap3_noncore_dpll_enable(struct clk *clk) > if (!dd) > return -EINVAL; > > - rate = omap2_get_dpll_rate(clk); > - > - if (dd->bypass_clk->rate == rate) > + if (clk->rate == dd->bypass_clk->rate) > r = _omap3_noncore_dpll_bypass(clk); > else > r = _omap3_noncore_dpll_lock(clk); > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
