On Wed, 15 Jan 2014 13:27:21 +0200 Jyri Sarha <jsa...@ti.com> wrote: > From driver/gpu/drm/i2c/tda998x_drv.c. The driver configures CTS_N > register statically to a value that works only with 4 byte samples. > According to my tests it is possible to support 3 and 2 byte samples too > by changing the CTS_N register value, but I am not sure if the > configuration can be changed on the fly. My data sheet of the nxp chip > is very vague about the register definitions, but I suppose the register > configures some clock divider on the chip. HDMI supports only upto 24bit > audio and the data sheet states that any extraneous least significant > bits are ignored.
In the tda998x driver, the CTS_N is automatic (AIP_CNTRL_0_ACR_MAN is not set). Then, in my Cubox (Marvell A510 + tda19988), the 16, 24 and 32 bits formats are working well with I2S input at any rate. -- Ken ar c'hentaƱ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html