Hi Tony,

On 07/15/2014 08:30 AM, Tony Lindgren wrote:
> * Suman Anna <s-a...@ti.com> [140711 14:47]:
>> Add the hwmod data for the 13 instances of the system mailbox
>> IP in DRA7 SoC. The patch is needed for performing a soft-reset
>> while configuring the respective mailbox instance, otherwise is
>> a non-essential change for functionality. The modules are smart
>> idled on reset, and the IP module mode is hardware controlled.
>>
>> Cc: Rajendra Nayak <rna...@ti.com>
>> Cc: Paul Walmsley <p...@pwsan.com>
>> Signed-off-by: Suman Anna <s-a...@ti.com>
>> ---
>>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 305 
>> ++++++++++++++++++++++++++++++
>>  1 file changed, 305 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c 
>> b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>> index 20b4398..e35f5b1 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>> @@ -939,6 +939,194 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>>  };
>>  
>>  /*
>> + * 'mailbox' class
>> + *
>> + */
>> +
>> +static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = {
>> +    .rev_offs       = 0x0000,
>> +    .sysc_offs      = 0x0010,
>> +    .sysc_flags     = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
>> +                       SYSC_HAS_SOFTRESET),
>> +    .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
>> +    .sysc_fields    = &omap_hwmod_sysc_type2,
>> +};
>> +
>> +static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = {
>> +    .name   = "mailbox",
>> +    .sysc   = &dra7xx_mailbox_sysc,
>> +};
> 
> Hmm I'm seeing just the following MAILBOX_SYSCONFIG in at least
> am57xx TRM:
> 
> 31:4  RESERVED
> 3:2   SIDLEMODE       0 = force-idle 1 = no-idle, 2 = smart-idle, 3 = reserved
> 1     RESERVED
> 0     SOFTRESET
> 
> So it seems that SYSC_HAS_RESET_STATUS above is wrong? Can you guys
> please check.

The same SOFTRESET bit is used for both triggering the softreset and
reading the reset done status. Once you write a 1 to trigger a reset,
the bit will be cleared once the reset is done. This is no different
from OMAP4. The logic in _wait_softreset_complete in omap_hwmod.c was
already designed to work with this properly.

regards
Suman
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to