On 07/23/2014 04:24 AM, Tony Lindgren wrote:
> * Tony Lindgren <t...@atomide.com> [140716 00:10]:
>> * Suman Anna <s-a...@ti.com> [140715 09:59]:
>>> Hi Tony,
>>>
>>> On 07/15/2014 08:30 AM, Tony Lindgren wrote:
>>>> * Suman Anna <s-a...@ti.com> [140711 14:47]:
>>>>> Add the hwmod data for the 13 instances of the system mailbox
>>>>> IP in DRA7 SoC. The patch is needed for performing a soft-reset
>>>>> while configuring the respective mailbox instance, otherwise is
>>>>> a non-essential change for functionality. The modules are smart
>>>>> idled on reset, and the IP module mode is hardware controlled.
>>>>>
>>>>> Cc: Rajendra Nayak <rna...@ti.com>
>>>>> Cc: Paul Walmsley <p...@pwsan.com>
>>>>> Signed-off-by: Suman Anna <s-a...@ti.com>
>>>>> ---
>>>>> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 305
>>>>> ++++++++++++++++++++++++++++++
>>>>> 1 file changed, 305 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>>>>> b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>>>>> index 20b4398..e35f5b1 100644
>>>>> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>>>>> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
>>>>> @@ -939,6 +939,194 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>>>>> };
>>>>>
>>>>> /*
>>>>> + * 'mailbox' class
>>>>> + *
>>>>> + */
>>>>> +
>>>>> +static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = {
>>>>> + .rev_offs = 0x0000,
>>>>> + .sysc_offs = 0x0010,
>>>>> + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
>>>>> + SYSC_HAS_SOFTRESET),
>>>>> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
>>>>> + .sysc_fields = &omap_hwmod_sysc_type2,
>>>>> +};
>>>>> +
>>>>> +static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = {
>>>>> + .name = "mailbox",
>>>>> + .sysc = &dra7xx_mailbox_sysc,
>>>>> +};
>>>>
>>>> Hmm I'm seeing just the following MAILBOX_SYSCONFIG in at least
>>>> am57xx TRM:
>>>>
>>>> 31:4 RESERVED
>>>> 3:2 SIDLEMODE 0 = force-idle 1 = no-idle, 2 = smart-idle, 3 =
>>>> reserved
>>>> 1 RESERVED
>>>> 0 SOFTRESET
>>>>
>>>> So it seems that SYSC_HAS_RESET_STATUS above is wrong? Can you guys
>>>> please check.
>>>
>>> The same SOFTRESET bit is used for both triggering the softreset and
>>> reading the reset done status. Once you write a 1 to trigger a reset,
>>> the bit will be cleared once the reset is done. This is no different
>>> from OMAP4. The logic in _wait_softreset_complete in omap_hwmod.c was
>>> already designed to work with this properly.
>>
>> Oh OK, I guess I got it confused with SYSS_HAS_RESET_STATUS. Paul,
>> want to ack this one if no other issues? I can then set this series
>> into a branch against -rc1 that we can all merge in as needed as
>> it seems that the driver changes may need this branch as a base too.
>
> I have applied these into omap-for-v3.17/mailbox and merged also
> into omap-for-v3.17/soc.
>
Thank you, Tony.
regards
Suman
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
