This allows setting the correct fifo_mode when multiple
MUSB glue layers are built-in.
Cc: Fabio Baltieri <fabio.balti...@linaro.org>
Cc: Lee Jones <lee.jo...@linaro.org>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Apelete Seketeli <apel...@seketeli.net>
Cc: Lars-Peter Clausen <l...@metafoo.de>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
drivers/usb/musb/blackfin.c | 1 +
drivers/usb/musb/da8xx.c | 1 +
drivers/usb/musb/jz4740.c | 1 +
drivers/usb/musb/musb_core.c | 21 ++++++---------------
drivers/usb/musb/ux500.c | 1 +
5 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index c55fcfd..b8442b9 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -474,6 +474,7 @@ static const struct musb_platform_ops bfin_ops = {
.writew = bfin_writew,
.readl = bfin_readl,
.writel = bfin_writel,
+ .fifo_mode = 2,
.read_fifo = bfin_read_fifo,
.write_fifo = bfin_write_fifo,
.enable = bfin_musb_enable,
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index c9079c8..5f9b486 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -462,6 +462,7 @@ static const struct musb_platform_ops da8xx_ops = {
.init = da8xx_musb_init,
.exit = da8xx_musb_exit,
+ .fifo_mode = 2,
.enable = da8xx_musb_enable,
.disable = da8xx_musb_disable,
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 40e9874..bb7b263 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -107,6 +107,7 @@ static int jz4740_musb_exit(struct musb *musb)
static const struct musb_platform_ops jz4740_musb_ops = {
.quirks = MUSB_INDEXED_EP,
+ .fifo_mode = 2,
.init = jz4740_musb_init,
.exit = jz4740_musb_exit,
};
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 48ddc82..0875365 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1116,21 +1116,7 @@ static void musb_shutdown(struct platform_device *pdev)
* We don't currently use dynamic fifo setup capability to do anything
* more than selecting one of a bunch of predefined configurations.
*/
-#if defined(CONFIG_USB_MUSB_TUSB6010) \
- || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) \
- || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
- || defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE) \
- || defined(CONFIG_USB_MUSB_AM35X) \
- || defined(CONFIG_USB_MUSB_AM35X_MODULE) \
- || defined(CONFIG_USB_MUSB_DSPS) \
- || defined(CONFIG_USB_MUSB_DSPS_MODULE)
-static ushort fifo_mode = 4;
-#elif defined(CONFIG_USB_MUSB_UX500) \
- || defined(CONFIG_USB_MUSB_UX500_MODULE)
-static ushort fifo_mode = 5;
-#else
-static ushort fifo_mode = 2;
-#endif
+static ushort fifo_mode;
/* "modprobe ... fifo_mode=1" etc */
module_param(fifo_mode, ushort, 0);
@@ -2040,6 +2026,11 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
musb->io.ep_select = musb_flat_ep_select;
}
+ if (musb->ops->fifo_mode)
+ fifo_mode = musb->ops->fifo_mode;
+ else
+ fifo_mode = 4;
+
if (musb->ops->fifo_offset)
musb->io.fifo_offset = musb->ops->fifo_offset;
else
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index c170501..c372518 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -191,6 +191,7 @@ static const struct musb_platform_ops ux500_ops = {
.quirks = MUSB_INDEXED_EP,
.init = ux500_musb_init,
.exit = ux500_musb_exit,
+ .fifo_mode = 5,
.set_vbus = ux500_musb_set_vbus,
};
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
