Hi Tony,

Thanks for the patch.

On Mon, Nov-24-2014 at 11:05:03 AM -0800, Tony Lindgren wrote:
> This allows the endpoints to work when multiple MUSB glue
> layers are built in.

Applied on top of 3.18-rc6 mainline and tested successfully on JZ4740.
Been able to use ethernet-over-usb to access the internet on
device. No issue as far as I'm concerned.

Acked-by: Apelete Seketeli <apel...@seketeli.net>

> Cc: Fabio Baltieri <fabio.balti...@linaro.org>
> Cc: Lee Jones <lee.jo...@linaro.org>
> Cc: Linus Walleij <linus.wall...@linaro.org>
> Cc: Apelete Seketeli <apel...@seketeli.net>
> Cc: Lars-Peter Clausen <l...@metafoo.de>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
> ---
>  drivers/usb/musb/am35x.c     |  1 +
>  drivers/usb/musb/da8xx.c     |  1 +
>  drivers/usb/musb/jz4740.c    |  1 +
>  drivers/usb/musb/musb_core.c | 38 +++++++++++++++++++++++++++++++++++++-
>  drivers/usb/musb/musb_core.h | 37 +------------------------------------
>  drivers/usb/musb/musb_dsps.c |  1 +
>  drivers/usb/musb/musb_io.h   |  2 ++
>  drivers/usb/musb/musb_regs.h | 11 -----------
>  drivers/usb/musb/musbhsdma.c |  7 ++++---
>  drivers/usb/musb/tusb6010.c  | 13 +++++++++++++
>  drivers/usb/musb/ux500.c     |  1 +
>  11 files changed, 62 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
> index 13d1d77..1ea4a67 100644
> --- a/drivers/usb/musb/am35x.c
> +++ b/drivers/usb/musb/am35x.c
> @@ -438,6 +438,7 @@ static void am35x_read_fifo(struct musb_hw_ep *hw_ep, u16 
> len, u8 *dst)
>  }
>  
>  static const struct musb_platform_ops am35x_ops = {
> +     .quirks         = MUSB_INDEXED_EP,
>       .init           = am35x_musb_init,
>       .exit           = am35x_musb_exit,
>  
> diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
> index 058775e..c9079c8 100644
> --- a/drivers/usb/musb/da8xx.c
> +++ b/drivers/usb/musb/da8xx.c
> @@ -458,6 +458,7 @@ static int da8xx_musb_exit(struct musb *musb)
>  }
>  
>  static const struct musb_platform_ops da8xx_ops = {
> +     .quirks         = MUSB_INDEXED_EP,
>       .init           = da8xx_musb_init,
>       .exit           = da8xx_musb_exit,
>  
> diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
> index d118729..40e9874 100644
> --- a/drivers/usb/musb/jz4740.c
> +++ b/drivers/usb/musb/jz4740.c
> @@ -106,6 +106,7 @@ static int jz4740_musb_exit(struct musb *musb)
>  }
>  
>  static const struct musb_platform_ops jz4740_musb_ops = {
> +     .quirks         = MUSB_INDEXED_EP,
>       .init           = jz4740_musb_init,
>       .exit           = jz4740_musb_exit,
>  };
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 2fbe149..48ddc82 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -229,6 +229,27 @@ static u32 musb_default_fifo_offset(u8 epnum)
>       return 0x20 + (epnum * 4);
>  }
>  
> +/* "flat" mapping: each endpoint has its own i/o address */
> +static void musb_flat_ep_select(void __iomem *mbase, u8 epnum)
> +{
> +}
> +
> +static u32 musb_flat_ep_offset(u8 epnum, u16 offset)
> +{
> +     return 0x100 + (0x10 * epnum) + offset;
> +}
> +
> +/* "indexed" mapping: INDEX register controls register bank select */
> +static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum)
> +{
> +     musb_writeb(mbase, MUSB_INDEX, epnum);
> +}
> +
> +static u32 musb_indexed_ep_offset(u8 epnum, u16 offset)
> +{
> +     return 0x10 + offset;
> +}
> +
>  static u8 musb_default_readb(const void __iomem *addr, unsigned offset)
>  {
>       return __raw_readb(addr + offset);
> @@ -1534,7 +1555,7 @@ static int musb_core_init(u16 musb_type, struct musb 
> *musb)
>               }
>  #endif
>  
> -             hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
> +             hw_ep->regs = musb->io.ep_offset(i, 0) + mbase;
>               hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
>               hw_ep->rx_reinit = 1;
>               hw_ep->tx_reinit = 1;
> @@ -2004,6 +2025,21 @@ musb_init_controller(struct device *dev, int nIrq, 
> void __iomem *ctrl)
>       if (musb->ops->quirks)
>               musb->io.quirks = musb->ops->quirks;
>  
> +     /* At least tusb6010 has it's own offsets.. */
> +     if (musb->ops->ep_offset)
> +             musb->io.ep_offset = musb->ops->ep_offset;
> +     if (musb->ops->ep_select)
> +             musb->io.ep_select = musb->ops->ep_select;
> +
> +     /* ..and some devices use indexed offset or flat offset */
> +     if (musb->io.quirks & MUSB_INDEXED_EP) {
> +             musb->io.ep_offset = musb_indexed_ep_offset;
> +             musb->io.ep_select = musb_indexed_ep_select;
> +     } else {
> +             musb->io.ep_offset = musb_flat_ep_offset;
> +             musb->io.ep_select = musb_flat_ep_select;
> +     }
> +
>       if (musb->ops->fifo_offset)
>               musb->io.fifo_offset = musb->ops->fifo_offset;
>       else
> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
> index 7c7f38c..02f62cb 100644
> --- a/drivers/usb/musb/musb_core.h
> +++ b/drivers/usb/musb/musb_core.h
> @@ -124,41 +124,6 @@ enum musb_g_ep0_state {
>  #define OTG_TIME_A_AIDL_BDIS 200             /* min 200 msec */
>  #define OTG_TIME_B_ASE0_BRST 100             /* min 3.125 ms */
>  
> -
> -/*************************** REGISTER ACCESS 
> ********************************/
> -
> -/* Endpoint registers (other than dynfifo setup) can be accessed either
> - * directly with the "flat" model, or after setting up an index register.
> - */
> -
> -#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
> -             || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
> -             || defined(CONFIG_ARCH_OMAP4)
> -/* REVISIT indexed access seemed to
> - * misbehave (on DaVinci) for at least peripheral IN ...
> - */
> -#define      MUSB_FLAT_REG
> -#endif
> -
> -/* TUSB mapping: "flat" plus ep0 special cases */
> -#if defined(CONFIG_USB_MUSB_TUSB6010) || \
> -     defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
> -#define musb_ep_select(_mbase, _epnum) \
> -     musb_writeb((_mbase), MUSB_INDEX, (_epnum))
> -#define      MUSB_EP_OFFSET                  MUSB_TUSB_OFFSET
> -
> -/* "flat" mapping: each endpoint has its own i/o address */
> -#elif        defined(MUSB_FLAT_REG)
> -#define musb_ep_select(_mbase, _epnum)       (((void)(_mbase)), 
> ((void)(_epnum)))
> -#define      MUSB_EP_OFFSET                  MUSB_FLAT_OFFSET
> -
> -/* "indexed" mapping: INDEX register controls register bank select */
> -#else
> -#define musb_ep_select(_mbase, _epnum) \
> -     musb_writeb((_mbase), MUSB_INDEX, (_epnum))
> -#define      MUSB_EP_OFFSET                  MUSB_INDEXED_OFFSET
> -#endif
> -
>  /****************************** FUNCTIONS ********************************/
>  
>  #define MUSB_HST_MODE(_musb)\
> @@ -514,7 +479,7 @@ static inline int musb_read_fifosize(struct musb *musb,
>       u8 reg = 0;
>  
>       /* read from core using indexed model */
> -     reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
> +     reg = musb_readb(mbase, musb->io.ep_offset(epnum, MUSB_FIFOSIZE));
>       /* 0's returned when no more endpoints */
>       if (!reg)
>               return -ENODEV;
> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
> index 48bc09e..b7f2efc 100644
> --- a/drivers/usb/musb/musb_dsps.c
> +++ b/drivers/usb/musb/musb_dsps.c
> @@ -636,6 +636,7 @@ static int dsps_musb_reset(struct musb *musb)
>  }
>  
>  static struct musb_platform_ops dsps_ops = {
> +     .quirks         = MUSB_INDEXED_EP,
>       .init           = dsps_musb_init,
>       .exit           = dsps_musb_exit,
>  
> diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> index 14aa217..8a57a6f 100644
> --- a/drivers/usb/musb/musb_io.h
> +++ b/drivers/usb/musb/musb_io.h
> @@ -37,6 +37,8 @@
>  
>  #include <linux/io.h>
>  
> +#define musb_ep_select(_mbase, _epnum)       musb->io.ep_select((_mbase), 
> (_epnum))
> +
>  /**
>   * struct musb_io - IO functions for MUSB
>   * @quirks:  platform specific flags
> diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
> index b2b1f73..92b4c3d 100644
> --- a/drivers/usb/musb/musb_regs.h
> +++ b/drivers/usb/musb/musb_regs.h
> @@ -287,19 +287,8 @@
>  #define MUSB_FIFOSIZE                0x0F
>  #define MUSB_CONFIGDATA              MUSB_FIFOSIZE   /* Re-used for EP0 */
>  
> -/* Offsets to endpoint registers in indexed model (using INDEX register) */
> -#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
> -     (0x10 + (_offset))
> -
> -/* Offsets to endpoint registers in flat models */
> -#define MUSB_FLAT_OFFSET(_epnum, _offset)    \
> -     (0x100 + (0x10*(_epnum)) + (_offset))
> -
>  #if defined(CONFIG_USB_MUSB_TUSB6010) ||     \
>       defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
> -/* TUSB6010 EP0 configuration register is special */
> -#define MUSB_TUSB_OFFSET(_epnum, _offset)    \
> -     (0x10 + _offset)
>  #include "tusb6010.h"                /* Needed "only" for TUSB_EP0_CONF */
>  #endif
>  
> diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
> index e8e9f9a..ab7ec09 100644
> --- a/drivers/usb/musb/musbhsdma.c
> +++ b/drivers/usb/musb/musbhsdma.c
> @@ -195,6 +195,7 @@ static int dma_channel_abort(struct dma_channel *channel)
>  {
>       struct musb_dma_channel *musb_channel = channel->private_data;
>       void __iomem *mbase = musb_channel->controller->base;
> +     struct musb *musb = musb_channel->controller->private_data;
>  
>       u8 bchannel = musb_channel->idx;
>       int offset;
> @@ -202,7 +203,7 @@ static int dma_channel_abort(struct dma_channel *channel)
>  
>       if (channel->status == MUSB_DMA_STATUS_BUSY) {
>               if (musb_channel->transmit) {
> -                     offset = MUSB_EP_OFFSET(musb_channel->epnum,
> +                     offset = musb->io.ep_offset(musb_channel->epnum,
>                                               MUSB_TXCSR);
>  
>                       /*
> @@ -215,7 +216,7 @@ static int dma_channel_abort(struct dma_channel *channel)
>                       csr &= ~MUSB_TXCSR_DMAMODE;
>                       musb_writew(mbase, offset, csr);
>               } else {
> -                     offset = MUSB_EP_OFFSET(musb_channel->epnum,
> +                     offset = musb->io.ep_offset(musb_channel->epnum,
>                                               MUSB_RXCSR);
>  
>                       csr = musb_readw(mbase, offset);
> @@ -326,7 +327,7 @@ static irqreturn_t dma_controller_irq(int irq, void 
> *private_data)
>                                           (musb_channel->max_packet_sz - 1)))
>                                   ) {
>                                       u8  epnum  = musb_channel->epnum;
> -                                     int offset = MUSB_EP_OFFSET(epnum,
> +                                     int offset = musb->io.ep_offset(epnum,
>                                                                   MUSB_TXCSR);
>                                       u16 txcsr;
>  
> diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
> index 38efebc..fe69bad 100644
> --- a/drivers/usb/musb/tusb6010.c
> +++ b/drivers/usb/musb/tusb6010.c
> @@ -131,6 +131,17 @@ static u32 tusb_fifo_offset(u8 epnum)
>       return 0x200 + (epnum * 0x20);
>  }
>  
> +static u32 tusb_ep_offset(u8 epnum, u16 offset)
> +{
> +     return 0x10 + offset;
> +}
> +
> +/* TUSB mapping: "flat" plus ep0 special cases */
> +static void tusb_ep_select(void __iomem *mbase, u8 epnum)
> +{
> +     musb_writeb(mbase, MUSB_INDEX, epnum);
> +}
> +
>  /*
>   * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
>   */
> @@ -1174,6 +1185,8 @@ static const struct musb_platform_ops tusb_ops = {
>       .init           = tusb_musb_init,
>       .exit           = tusb_musb_exit,
>  
> +     .ep_offset      = tusb_ep_offset,
> +     .ep_select      = tusb_ep_select,
>       .fifo_offset    = tusb_fifo_offset,
>       .readb          = tusb_readb,
>       .writeb         = tusb_writeb,
> diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
> index dc666e9..c170501 100644
> --- a/drivers/usb/musb/ux500.c
> +++ b/drivers/usb/musb/ux500.c
> @@ -188,6 +188,7 @@ static int ux500_musb_exit(struct musb *musb)
>  }
>  
>  static const struct musb_platform_ops ux500_ops = {
> +     .quirks         = MUSB_INDEXED_EP,
>       .init           = ux500_musb_init,
>       .exit           = ux500_musb_exit,
>  
> -- 
> 2.1.3
> 

-- 
        Apelete
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to