Hi,
Arun K S wrote:
On Fri, Jun 19, 2009 at 4:20 AM, Janusz
Krzysztofik<jkrzy...@tis.icnet.pl> wrote:
After all, could someone please give me an advise, what tree, even with
buggy omap1510 mcbsp/dsp support, should I base my work on for best results?
You have to use current omap tree with the patches from current sound
tree(ASoC omap platform drivers changes) for
testing the driver.
Arun,
Thanks, from now on I use l-o master, right? As I do my development
using OE, I am still investigating how to set up a bb recipe to get ALSA
git tree applied over l-o.
Arun K S wrote:
On Fri, Jun 19, 2009 at 4:20 AM, Janusz
Krzysztofik<jkrzy...@tis.icnet.pl> wrote:
Arun K S wrote:
On Thu, Jun 18, 2009 at 4:40 AM, Janusz
Krzysztofik<jkrzy...@tis.icnet.pl> wrote:
... I retried the new driver on commit
90e758af52ba803cba233fabee81176d99589f09 and confirmed the prevoiusly
seen
hangup. I found that it was omap_mcbsp_request() never returning back
from.
I faced the same issue while writing ASoC driver for tlv320aic23b codec.
You can have a look at this thread:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg03852.html
Initially i used to add the omap_mcbsp_request()
at the boot time, other wise it hangs up. ...
I believe there are some patches from Russel
for the DSP memory mapping during
2.6.29 kernel.
Jarkko Nikula wrote:
On Thu, 18 Jun 2009 13:40:56 +0200
Janusz Krzysztofik <jkrzy...@tis.icnet.pl> wrote:
Then I retired the same on the commit
d8376cc482b241701f7606c81ad578b90853e175 and got similiar hangup.
Can you move this boot time initialization moment around with
xxx_initcall variants to see what is the point where block is not
anymore accessable? Basically around the DSP power up and idle code
(were there such code for older audio drivers?) and where unused clocks
are disabled (functions clk_disable_unused and
omap1_clk_disable_unused).
Arun, Jarkko,
Thanks. Fortunatelly, I can confirm that the problem of
omap_mcbsp_request() not returning back when called too late, has been
already solved and no longer applies to 2.6.30, be it omap or mainline,
with or without a working dsp.
Tony Lindgren wrote:
* Janusz Krzysztofik <jkrzy...@tis.icnet.pl> [090618 14:52]:
Tony Lindgren wrote:
* Peter Ujfalusi <peter.ujfal...@nokia.com> [090618 12:03]:
On Wednesday 17 June 2009 17:12:38 ext Janusz Krzysztofik wrote:
Janusz Krzysztofik wrote:
... got the answer from
omap_msbsp_dump_reg(): all mcbsp1 register read operations returned
0xffff. So it looks like I simply get no acccess to mcbsp1 at all.
One thing that I have noticed is that the McBSP1 (and 3) is under the
DSP Public Peripherals, while McBSP2 is under MPU Public Peripherals
(in OMAP1510).
On omap1, DSP needs to be powered and idled before some mcbsp clocks can
be used. Or at least needs to be powered up.
AFAICS there is no DSP code in mainline at all, so the answer is no, DSP
was likely not powered up at all.
We at least used to have code to power and idle the DSP even without the
dspgateway compiled in.. Sorry I don't remember the details. But most
likely you need to have the dspgateway patch enabled.
I hacked in the prevoiusly removed dsp_common.c containing
omap_dsp_init(), with all header files required for successfull
compilation, and finally got my driver working on top of current l-o.
Jarkko, Peter, Mark, Tony, Arun,
Thanks for your help.
It seams that dsp_common.c with its omap_dsp_init() used to be always
compiled into the kernel, even if the rest of dspgateway code was not
compiled or compiled as a module. This file, initially existing in
arch/arm/plat-omap, was moved to drivers/dsp (commit
23ed8b5cf043a9cd40b5d415645b3543357d9a1a), and then removed completely
(commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c), together with other
dspgateway code. Since then, McBSP ports that are DSP public peripherals
have probably no chance to work, at least on omap1510, as I have verified.
Perhaps this single file (or its part with omap_dsp_init() at least)
should never happen to be moved out of arch/arm/plat-omap? One of its
related header files, dsp_common.h, has survived in the tree after it
was moved to include/asm-arm/arch-omap/ (commit
d23b6a447c9cd1d7376c5ec109b4be015a121eec), and then to
arch/arm/plat-omap/include/map/.
Can I do anything to get omap_dsp_init() back into the omap tree? Could
I just start with readding that old dsp_common.c, including any
necessary header files, back to arch/arm/plat-omap/dsp? Or what other
way should I take to restore omap1510 mcbsp1/3 support back?
Thanks,
Janusz
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
