This way we don't have conflicts with the defines
with compiling in multiple omaps. Set the addresses
for uarts in struct omap_globals for the early serial
init code.
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap1/include/mach/debug-macro.S | 16 +++++----
arch/arm/mach-omap1/serial.c | 6 ++-
arch/arm/mach-omap2/include/mach/debug-macro.S | 15 ++++----
arch/arm/mach-omap2/serial.c | 15 ++++++--
arch/arm/plat-omap/common.c | 18 ++++++++++
arch/arm/plat-omap/include/plat/common.h | 5 +++
arch/arm/plat-omap/include/plat/serial.h | 44 +++++++++++++-----------
7 files changed, 77 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S
b/arch/arm/mach-omap1/include/mach/debug-macro.S
index aedb746..23e4724 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,6 +11,10 @@
*
*/
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -30,13 +34,13 @@
.endm
.macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
- and \rd, \rd, #0x60
- teq \rd, #0x60
+1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
beq 1002f
- ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
- and \rd, \rd, #0x60
- teq \rd, #0x60
+ ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
1002:
.endm
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6e5207c..349de90 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct
plat_serial8250_port *p)
static struct plat_serial8250_port serial_platform_data[] = {
{
- .mapbase = OMAP_UART1_BASE,
+ .mapbase = OMAP1_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -72,7 +72,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
- .mapbase = OMAP_UART2_BASE,
+ .mapbase = OMAP1_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -80,7 +80,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
- .mapbase = OMAP_UART3_BASE,
+ .mapbase = OMAP1_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S
b/arch/arm/mach-omap2/include/mach/debug-macro.S
index e9f255d..0c96e1c 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,6 +11,10 @@
*
*/
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -44,15 +48,10 @@
.endm
.macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
- and \rd, \rd, #0x60
- teq \rd, #0x60
- beq 1002f
- ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
- and \rd, \rd, #0x60
- teq \rd, #0x60
+1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
-1002:
.endm
.macro waituart,rd,rx
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 837b347..21e51c5 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -74,7 +74,6 @@ static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data0[] = {
{
- .mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
static struct plat_serial8250_port serial_platform_data1[] = {
{
- .mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -100,7 +98,6 @@ static struct plat_serial8250_port serial_platform_data1[] =
{
static struct plat_serial8250_port serial_platform_data2[] = {
{
- .mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -114,7 +111,6 @@ static struct plat_serial8250_port serial_platform_data2[]
= {
#ifdef CONFIG_ARCH_OMAP4
static struct plat_serial8250_port serial_platform_data3[] = {
{
- .mapbase = OMAP_UART4_BASE,
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -125,6 +121,17 @@ static struct plat_serial8250_port serial_platform_data3[]
= {
}
};
#endif
+
+void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
+{
+ serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
+ serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
+ serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
+#ifdef CONFIG_ARCH_OMAP4
+ serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
+#endif
+}
+
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bf1eaf3..1c72b65 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -34,6 +34,7 @@
#include <plat/control.h>
#include <plat/mux.h>
#include <plat/fpga.h>
+#include <plat/serial.h>
#include <plat/clock.h>
@@ -233,11 +234,15 @@ static struct omap_globals omap242x_globals = {
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
+ .uart1_phys = OMAP2_UART1_BASE,
+ .uart2_phys = OMAP2_UART2_BASE,
+ .uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_242x(void)
{
__omap2_set_globals(&omap242x_globals);
+ omap2_set_globals_uart(&omap242x_globals);
}
#endif
@@ -251,11 +256,15 @@ static struct omap_globals omap243x_globals = {
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
+ .uart1_phys = OMAP2_UART1_BASE,
+ .uart2_phys = OMAP2_UART2_BASE,
+ .uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_243x(void)
{
__omap2_set_globals(&omap243x_globals);
+ omap2_set_globals_uart(&omap243x_globals);
}
#endif
@@ -269,11 +278,15 @@ static struct omap_globals omap343x_globals = {
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+ .uart1_phys = OMAP3_UART1_BASE,
+ .uart2_phys = OMAP3_UART2_BASE,
+ .uart3_phys = OMAP3_UART3_BASE,
};
void __init omap2_set_globals_343x(void)
{
__omap2_set_globals(&omap343x_globals);
+ omap2_set_globals_uart(&omap343x_globals);
}
#endif
@@ -285,6 +298,10 @@ static struct omap_globals omap4_globals = {
.prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
.cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+ .uart1_phys = OMAP4_UART1_BASE,
+ .uart2_phys = OMAP4_UART2_BASE,
+ .uart3_phys = OMAP4_UART3_BASE,
+ .uart4_phys = OMAP4_UART4_BASE,
};
void __init omap2_set_globals_443x(void)
@@ -292,6 +309,7 @@ void __init omap2_set_globals_443x(void)
omap2_set_globals_tap(&omap4_globals);
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
+ omap2_set_globals_uart(&omap4_globals);
}
#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h
b/arch/arm/plat-omap/include/plat/common.h
index 32c2227..a8fa0d7 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -47,6 +47,10 @@ struct omap_globals {
void __iomem *prm; /* Power and Reset Management */
void __iomem *cm; /* Clock Management */
void __iomem *cm2;
+ unsigned long uart1_phys;
+ unsigned long uart2_phys;
+ unsigned long uart3_phys;
+ unsigned long uart4_phys;
};
void omap2_set_globals_242x(void);
@@ -59,6 +63,7 @@ void omap2_set_globals_tap(struct omap_globals *);
void omap2_set_globals_sdrc(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap2_set_globals_uart(struct omap_globals *);
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/serial.h
b/arch/arm/plat-omap/include/plat/serial.h
index f5a4a92..c7e2b85 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,37 +15,39 @@
#include <linux/init.h>
-#if defined(CONFIG_ARCH_OMAP1)
/* OMAP1 serial ports */
-#define OMAP_UART1_BASE 0xfffb0000
-#define OMAP_UART2_BASE 0xfffb0800
-#define OMAP_UART3_BASE 0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
/* OMAP2 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x4806e000
-#elif defined(CONFIG_ARCH_OMAP3)
+#define OMAP2_UART1_BASE 0x4806a000
+#define OMAP2_UART2_BASE 0x4806c000
+#define OMAP2_UART3_BASE 0x4806e000
+
/* OMAP3 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x49020000
-#elif defined(CONFIG_ARCH_OMAP4)
+#define OMAP3_UART1_BASE 0x4806a000
+#define OMAP3_UART2_BASE 0x4806c000
+#define OMAP3_UART3_BASE 0x49020000
+
/* OMAP4 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x48020000
-#define OMAP_UART4_BASE 0x4806e000
-#endif
+#define OMAP4_UART1_BASE 0x4806a000
+#define OMAP4_UART2_BASE 0x4806c000
+#define OMAP4_UART3_BASE 0x48020000
+#define OMAP4_UART4_BASE 0x4806e000
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
+/* This is only used by 8250.c for omap1510 */
#define is_omap_port(pt) ({int __ret = 0; \
- if ((pt)->port.mapbase == OMAP_UART1_BASE || \
- (pt)->port.mapbase == OMAP_UART2_BASE || \
- (pt)->port.mapbase == OMAP_UART3_BASE) \
+ if ((pt)->port.mapbase == OMAP1_UART1_BASE || \
+ (pt)->port.mapbase == OMAP1_UART2_BASE || \
+ (pt)->port.mapbase == OMAP1_UART3_BASE) \
__ret = 1; \
__ret; \
})
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
