"Shilimkar, Santosh" <santosh.shilim...@ti.com> writes: >> -----Original Message----- >> From: Kevin Hilman [mailto:khil...@deeprootsystems.com] >> Sent: Thursday, September 09, 2010 8:52 PM >> To: Shilimkar, Santosh >> Cc: linux-omap@vger.kernel.org; t...@atomide.com >> Subject: Re: [PATCH 0/7] omap4: Fixes, hacks for es2.0 >> >> Santosh Shilimkar <santosh.shilim...@ti.com> writes: >> >> > This series has few fixes, hacks to get omap4 es2.0 working >> > on mainline. The patches are generated against the mainline >> > 2.6.36-rc3. >> >> Hi Santosh, thanks for this... >> >> > The series is boot tested tested on 4430 SDP, Blaze with >> > omap_4430sdp_defconfig with file over NFS and MMC. >> > >> > Also boot tested omap3_defconfig with ramdisk on OMAP4 and OMAP3 >> > SDPs. Same observation with Panda >> > >> > With omap3_defconfig, MMC while mounting the rootfs over MMC, the >> > boot hangs. Same observation with Panda >> >> On my ES2.0 Panda, rootfs on MMC is now working with this series. >> > I observed the same with MMC. Ramdisk boot worked for me on PANDA.
Note that I said "now working". I think you read my message as "not working." IOW, rootfs on MMC *is* working for me on my es2.0 Panda. I applied your series to current l-o master, and it works. >> However, rootfs over NFS is not yet working, presumably because the >> OMAP4 EHCI support is needed for the USB-attached smsc95xx to work >> properly. >> > This is correct. We need to get the MMC fixed o.w panda is unusable in > it's current form. > >> >> > [ 5.794616] regulator_init_complete: incomplete constraints, leaving >> VUSIM on >> > [ 5.802764] regulator_init_complete: incomplete constraints, leaving >> VPP on >> > [ 5.816131] twl_rtc twl_rtc: setting system clock to 2000-01-01 >> 00:53:12 UTC (9 ) >> > [ 5.849304] mmc0: new high speed MMC card at address 0001 >> > [ 5.856323] mmcblk0: mmc0:0001 SEM08G 7.39 GiB >> > [ 5.862091] mmcblk0: unknown partition table >> > [ 6.325500] omap_device: mmci-omap-hs.1: new worst case deactivate >> latency 0: 6 >> >> Based on this message, this is not a mainline kernel, but one where the >> omap_device conversion for MMC has been applied. >> > This is mainline 2.6.36-rc3.... > http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=shortlog;h=refs/heads/omap4-for-tony Then I don't understand where the 'omap_device: mmci-omap-hs.1:...' message is coming from in your kernel boot log. It should not be present in a mainline kernel as the MMC conversion to hwmod/omap_device is not in mainline, or linux-omap. That's why I assumed your boot log excerpt came from an internal kernel and not a mainline kernel. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
