Gentle Reminder !

Regards,
Kishore

On Tue, Sep 28, 2010 at 12:22 PM, kishore kadiyala
<kishorek.kadiy...@gmail.com> wrote:
> Hi Samuel,
>
> Could you please review this patch which touches mfd/twl6030-irq.c for
> card detect support
> of MMC1 controller on OMAP4.
>
> Regards,
> Kishore
>
> On Mon, Sep 27, 2010 at 1:25 PM, kishore kadiyala
> <kishorek.kadiy...@gmail.com> wrote:
>> Cc: Samuel Ortiz <sa...@linux.intel.com>
>>
>> On Fri, Sep 24, 2010 at 10:43 PM, kishore kadiyala
>> <kishore.kadiy...@ti.com> wrote:
>>> Adding card detect callback function and card detect configuration
>>> function for MMC1 Controller on OMAP4.
>>>
>>> Card detect configuration function does initial configuration of the
>>> MMC Control & PullUp-PullDown registers of Phoenix.
>>>
>>> For MMC1 Controller, card detect interrupt source is
>>> twl6030 which is non-gpio. The card detect call back function provides
>>> card present/absent status by reading MMC Control register present
>>> on twl6030.
>>>
>>> Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
>>> the suspend/resume initialization which was done in omap_hsmmc_gpio_init
>>> previously is moved to the probe thus making it generic for both OMAP3 & 
>>> OMAP4.
>>>
>>> Cc: Tony Lindgren <t...@atomide.com>
>>> Cc: Andrew Morton <a...@linux-foundation.org>
>>> Cc: Madhusudhan Chikkature <madhu...@ti.com>
>>> Cc: Adrian Hunter <adrian.hun...@nokia.com>
>>> Signed-off-by: Kishore Kadiyala <kishore.kadiy...@ti.com>
>>> ---
>>>  arch/arm/mach-omap2/board-4430sdp.c |    7 +++-
>>>  drivers/mfd/twl6030-irq.c           |   73 
>>> +++++++++++++++++++++++++++++++++++
>>>  drivers/mmc/host/omap_hsmmc.c       |    4 +-
>>>  include/linux/i2c/twl.h             |   31 +++++++++++++++
>>>  4 files changed, 112 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/board-4430sdp.c 
>>> b/arch/arm/mach-omap2/board-4430sdp.c
>>> index 9447644..a49f285 100644
>>> --- a/arch/arm/mach-omap2/board-4430sdp.c
>>> +++ b/arch/arm/mach-omap2/board-4430sdp.c
>>> @@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device 
>>> *dev)
>>>        struct omap_mmc_platform_data *pdata = dev->platform_data;
>>>
>>>        /* Setting MMC1 Card detect Irq */
>>> -       if (pdev->id == 0)
>>> +       if (pdev->id == 0) {
>>> +               ret = twl6030_mmc_card_detect_config();
>>> +               if (ret)
>>> +                       pr_err("Failed configuring MMC1 card detect\n");
>>>                pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
>>>                                                MMCDETECT_INTR_OFFSET;
>>> +               pdata->slots[0].card_detect = twl6030_mmc_card_detect;
>>> +       }
>>>        return ret;
>>>  }
>>>
>>> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
>>> index 10bf228..2d3bb82 100644
>>> --- a/drivers/mfd/twl6030-irq.c
>>> +++ b/drivers/mfd/twl6030-irq.c
>>> @@ -36,6 +36,7 @@
>>>  #include <linux/irq.h>
>>>  #include <linux/kthread.h>
>>>  #include <linux/i2c/twl.h>
>>> +#include <linux/platform_device.h>
>>>
>>>  /*
>>>  * TWL6030 (unlike its predecessors, which had two level interrupt handling)
>>> @@ -223,6 +224,78 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
>>>  }
>>>  EXPORT_SYMBOL(twl6030_interrupt_mask);
>>>
>>> +int twl6030_mmc_card_detect_config(void)
>>> +{
>>> +       int ret;
>>> +       u8 reg_val = 0;
>>> +
>>> +       /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
>>> +       twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
>>> +                                               REG_INT_MSK_LINE_B);
>>> +       twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
>>> +                                               REG_INT_MSK_STS_B);
>>> +       /*
>>> +        * Intially Configuring MMC_CTRL for receving interrupts &
>>> +        * Card status on TWL6030 for MMC1
>>> +        */
>>> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, 
>>> TWL6030_MMCCTRL);
>>> +       if (ret < 0) {
>>> +               pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
>>> +               return ret;
>>> +       }
>>> +       reg_val &= ~VMMC_AUTO_OFF;
>>> +       reg_val |= SW_FC;
>>> +       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, 
>>> TWL6030_MMCCTRL);
>>> +       if (ret < 0) {
>>> +               pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
>>> +               return ret;
>>> +       }
>>> +
>>> +       /* Configuring PullUp-PullDown register */
>>> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
>>> +                                               TWL6030_CFG_INPUT_PUPD3);
>>> +       if (ret < 0) {
>>> +               pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error 
>>> %d\n",
>>> +                                                                       
>>> ret);
>>> +               return ret;
>>> +       }
>>> +       reg_val &= ~(MMC_PU | MMC_PD);
>>> +       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
>>> +                                               TWL6030_CFG_INPUT_PUPD3);
>>> +       if (ret < 0) {
>>> +               pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error 
>>> %d\n",
>>> +                                                                       
>>> ret);
>>> +               return ret;
>>> +       }
>>> +       return 0;
>>> +}
>>> +EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
>>> +
>>> +int twl6030_mmc_card_detect(struct device *dev, int slot)
>>> +{
>>> +       int ret = -EIO;
>>> +       u8 read_reg = 0;
>>> +       struct platform_device *pdev = to_platform_device(dev);
>>> +
>>> +       if (pdev->id) {
>>> +               /* TWL6030 provide's Card detect support for
>>> +                * only MMC1 controller.
>>> +                */
>>> +               pr_err("Unkown MMC controller %d in %s\n", pdev->id, 
>>> __func__);
>>> +               return ret;
>>> +       }
>>> +       /*
>>> +        * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
>>> +        * 0 - Card not present ,1 - Card present
>>> +        */
>>> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
>>> +                                               TWL6030_MMCCTRL);
>>> +       if (ret >= 0)
>>> +               ret = read_reg & STS_MMC;
>>> +       return ret;
>>> +}
>>> +EXPORT_SYMBOL(twl6030_mmc_card_detect);
>>> +
>>>  int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
>>>  {
>>>
>>> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
>>> index 562dbbb..a51894d 100644
>>> --- a/drivers/mmc/host/omap_hsmmc.c
>>> +++ b/drivers/mmc/host/omap_hsmmc.c
>>> @@ -466,8 +466,6 @@ static int omap_hsmmc_gpio_init(struct 
>>> omap_mmc_platform_data *pdata)
>>>        int ret;
>>>
>>>        if (gpio_is_valid(pdata->slots[0].switch_pin)) {
>>> -               pdata->suspend = omap_hsmmc_suspend_cdirq;
>>> -               pdata->resume = omap_hsmmc_resume_cdirq;
>>>                if (pdata->slots[0].cover)
>>>                        pdata->slots[0].get_cover_state =
>>>                                        omap_hsmmc_get_cover_state;
>>> @@ -2211,6 +2209,8 @@ static int __init omap_hsmmc_probe(struct 
>>> platform_device *pdev)
>>>                                "Unable to grab MMC CD IRQ\n");
>>>                        goto err_irq_cd;
>>>                }
>>> +               pdata->suspend = omap_hsmmc_suspend_cdirq;
>>> +               pdata->resume = omap_hsmmc_resume_cdirq;
>>>        }
>>>
>>>        omap_hsmmc_disable_irq(host);
>>> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
>>> index 6de90bf..e64894c 100644
>>> --- a/include/linux/i2c/twl.h
>>> +++ b/include/linux/i2c/twl.h
>>> @@ -141,6 +141,16 @@
>>>  #define TWL6030_CHARGER_CTRL_INT_MASK  0x10
>>>  #define TWL6030_CHARGER_FAULT_INT_MASK         0x60
>>>
>>> +#define TWL6030_MMCCTRL                0xEE
>>> +#define VMMC_AUTO_OFF                  (0x1 << 3)
>>> +#define SW_FC                          (0x1 << 2)
>>> +#define STS_MMC                        0x1
>>> +
>>> +#define TWL6030_CFG_INPUT_PUPD3        0xF2
>>> +#define MMC_PU                         (0x1 << 3)
>>> +#define MMC_PD                         (0x1 << 2)
>>> +
>>> +
>>>
>>>  #define TWL4030_CLASS_ID               0x4030
>>>  #define TWL6030_CLASS_ID               0x6030
>>> @@ -173,6 +183,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, 
>>> unsigned num_bytes);
>>>  int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
>>>  int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
>>>
>>> +/* Card detect Configuration for MMC1 Controller on OMAP4 */
>>> +#ifdef CONFIG_TWL4030_CORE
>>> +int twl6030_mmc_card_detect_config(void);
>>> +#else
>>> +static inline int twl6030_mmc_card_detect_config(void)
>>> +{
>>> +       pr_debug("twl6030_mmc_card_detect_config not supported\n");
>>> +       return 0;
>>> +}
>>> +#endif
>>> +
>>> +/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
>>> +#ifdef CONFIG_TWL4030_CORE
>>> +int twl6030_mmc_card_detect(struct device *dev, int slot);
>>> +#else
>>> +static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
>>> +{
>>> +       pr_debug("Call back twl6030_mmc_card_detect not supported\n");
>>> +       return -EIO;
>>> +}
>>> +#endif
>>>  /*----------------------------------------------------------------------*/
>>>
>>>  /*
>>> --
>>> 1.7.0.4
>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to majord...@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to