Initialize asm_irq_flags in omap_init_irq and use it in
get_irqnr_and_base to detect between omap7xx and omap15xx/16xx.
Note that both INT_1510_IH2_IRQ and INT_1510_IH2_IRQ are defined
as 0, so use INT_1510_IH2_IRQ for both of them.
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap1/include/mach/entry-macro.S | 18 +++---------------
arch/arm/mach-omap1/irq.c | 4 ++++
arch/arm/plat-omap/include/plat/irqs.h | 2 +-
3 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S
b/arch/arm/mach-omap1/include/mach/entry-macro.S
index df9060e..25b74f9 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -14,20 +14,6 @@
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
-#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
- (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-#define INT_IH2_IRQ INT_7XX_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ INT_1510_IH2_IRQ
-#endif
-
.macro disable_fiq
.endm
@@ -47,9 +33,11 @@
beq 1510f
ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+ ldr \tmp, =asm_irq_flags @ irq flags address
+ ldr \tmp, [\tmp, #0] @ irq flags value
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
- cmpeq \irqnr, #INT_IH2_IRQ
+ cmpeq \irqnr, \tmp
ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index db913c3..e7f2166 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -180,22 +180,26 @@ void __init omap_init_irq(void)
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
if (cpu_is_omap7xx()) {
+ asm_irq_flags = INT_7XX_IH2_IRQ;
irq_banks = omap7xx_irq_banks;
irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
+ asm_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap1510_irq_banks;
irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
}
if (cpu_is_omap310()) {
+ asm_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap310_irq_banks;
irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (cpu_is_omap16xx()) {
+ asm_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap1610_irq_banks;
irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
}
diff --git a/arch/arm/plat-omap/include/plat/irqs.h
b/arch/arm/plat-omap/include/plat/irqs.h
index 65e20a6..2910de9 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -77,7 +77,7 @@
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
-#define INT_1610_IH2_IRQ 0
+#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
#define INT_1610_IH2_FIQ 2
#define INT_1610_McBSP2_TX 4
#define INT_1610_McBSP2_RX 5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
