On Fri, Jan 7, 2011 at 5:42 PM, J, KEERTHY <j-keer...@ti.com> wrote: > On Fri, Jan 7, 2011 at 3:25 AM, Guenter Roeck > <guenter.ro...@ericsson.com> wrote: >> On Thu, 2011-01-06 at 15:21 -0500, Mark Brown wrote: >>> On Thu, Jan 06, 2011 at 07:04:30AM -0800, Guenter Roeck wrote: >>> > On Thu, Jan 06, 2011 at 07:07:13AM -0500, Mark Brown wrote: >>> >>> > > Why? It's not like hwmon has an unreasonably large core or similar. >>> >>> > Because it creates an unnecessary dependency, and because it is not >>> > hwmon's >>> > responsibility to provide infrastructure for other subsystems or drivers. >>> >>> hwmon isn't really doing anything, though. The *driver* is doing >>> something but it doesn't really impact the core that much. Not that I'm >>> particularly sold on putting the ADC core in here, but total NACK based >>> on that alone seems rather harsh. >> >> Possibly. However, I had suggested the following earlier (to the 1st >> version of the patch): >> >>> I commented on this a couple of times below - the driver mixes generic >>> ADC reading functions with hwmon functionality. Generic ADC reading >>> functionality should be moved into another driver, possibly to mfd. >> >> Obviously that was ignored. Maybe someone is willing to listen this time >> around. >> > I am sorry for not responding on the generic ADC handling part. Since many > other ADC drivers are part of hwmon i thought hwmon was the appropriate > place. However I can surely split the generic ADC handling part in mfd and > only hardware monitoring part in hwmon as suggested. > >> I won't let people break modularity just for convenience in a subsystem >> I am responsible for. And forcing the hwmon subsystem, and with it a >> specific hwmon driver, to exist just because the adc functionality it >> provides is needed by some other (most likely unrelated) subsystem / >> driver _does_ break modularity. Worse, it is completely unnecessary to >> do so. Other twl4030 functionality was extracted into generic code. >> twl-core.c, twl4030-codec.c, twl4030-irq.c, twl4030-power.c are all in >> mfd. I fail to see the problem with mfd/twl4030-adc.c. >> >> Guenter >> >> >> > > Hello Samuel, > > Is it ok to have the generic ADC functionality in mfd as a separate file? > > Regards, > Keerthy >
Hello Samuel, We need your valuable inputs. Can generic ADC functionality can be in mfd as a separate file? Regards and Thanks, Keerthy -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
