Vaibhav Hiremath <hvaib...@ti.com> writes:
> Set OMAP_PIN_OFF_WAKEUPENABLE to enable the wake-up
> functionality from touchscreen controller.
>
> Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com>
> ---
> arch/arm/mach-omap2/board-omap3evm.c | 6 ++++--
> 1 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c
> b/arch/arm/mach-omap2/board-omap3evm.c
> index 2a2efa9..5eddf93 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -716,7 +716,8 @@ static struct omap_board_mux omap35x_board_mux[]
> __initdata = {
> OMAP_PIN_OFF_INPUT_PULLUP |
> OMAP_PIN_OFF_OUTPUT_LOW |
> OMAP_PIN_OFF_WAKEUPENABLE),
> OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
> - OMAP_PIN_OFF_INPUT_PULLUP |
> OMAP_PIN_OFF_OUTPUT_LOW),
> + OMAP_PIN_OFF_INPUT_PULLUP |
> OMAP_PIN_OFF_OUTPUT_LOW |
> + OMAP_PIN_OFF_WAKEUPENABLE),
This hunk doesn't apply because the code below (SYS_BOOT5, etc.) doesn't
exist in upstream code.
Kevin
> OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
> OMAP_PIN_OFF_NONE),
> OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
> @@ -729,7 +730,8 @@ static struct omap_board_mux omap36x_board_mux[]
> __initdata = {
> OMAP_PIN_OFF_INPUT_PULLUP |
> OMAP_PIN_OFF_OUTPUT_LOW |
> OMAP_PIN_OFF_WAKEUPENABLE),
> OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
> - OMAP_PIN_OFF_INPUT_PULLUP |
> OMAP_PIN_OFF_OUTPUT_LOW),
> + OMAP_PIN_OFF_INPUT_PULLUP |
> OMAP_PIN_OFF_OUTPUT_LOW |
> + OMAP_PIN_OFF_WAKEUPENABLE),
> /* AM/DM37x EVM: DSS data bus muxed with sys_boot */
> OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
> OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
