Hi,
On Thu, Feb 10, 2011 at 07:38:01PM +0530, Hema HK wrote:
> Calling runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync()
> for enabling/disabling the clocks, sysconfig settings.
>
> Enable clock, configure no-idle/standby when active and configure force
> idle/standby
> and disable clock when idled. This is taken care by the runtime framework when
> driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs.
does it have to be the _sync() ??
> Index: linux-2.6/drivers/usb/musb/omap2430.c
> ===================================================================
> --- linux-2.6.orig/drivers/usb/musb/omap2430.c
> +++ linux-2.6/drivers/usb/musb/omap2430.c
> @@ -33,6 +33,8 @@
> #include <linux/io.h>
> #include <linux/platform_device.h>
> #include <linux/dma-mapping.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/err.h>
>
> #include "musb_core.h"
> #include "omap2430.h"
> @@ -40,7 +42,6 @@
> struct omap2430_glue {
> struct device *dev;
> struct platform_device *musb;
> - struct clk *clk;
> };
> #define glue_to_musb(g) platform_get_drvdata(g->musb)
>
> @@ -216,20 +217,12 @@ static inline void omap2430_low_level_ex
> l = musb_readl(musb->mregs, OTG_FORCESTDBY);
> l |= ENABLEFORCE; /* enable MSTANDBY */
> musb_writel(musb->mregs, OTG_FORCESTDBY, l);
> -
> - l = musb_readl(musb->mregs, OTG_SYSCONFIG);
> - l |= ENABLEWAKEUP; /* enable wakeup */
> - musb_writel(musb->mregs, OTG_SYSCONFIG, l);
> }
>
> static inline void omap2430_low_level_init(struct musb *musb)
> {
> u32 l;
>
> - l = musb_readl(musb->mregs, OTG_SYSCONFIG);
> - l &= ~ENABLEWAKEUP; /* disable wakeup */
> - musb_writel(musb->mregs, OTG_SYSCONFIG, l);
> -
> l = musb_readl(musb->mregs, OTG_FORCESTDBY);
> l &= ~ENABLEFORCE; /* disable MSTANDBY */
> musb_writel(musb->mregs, OTG_FORCESTDBY, l);
> @@ -309,21 +302,6 @@ static int omap2430_musb_init(struct mus
>
> omap2430_low_level_init(musb);
>
> - l = musb_readl(musb->mregs, OTG_SYSCONFIG);
> - l &= ~ENABLEWAKEUP; /* disable wakeup */
> - l &= ~NOSTDBY; /* remove possible nostdby */
> - l |= SMARTSTDBY; /* enable smart standby */
> - l &= ~AUTOIDLE; /* disable auto idle */
> - l &= ~NOIDLE; /* remove possible noidle */
> - l |= SMARTIDLE; /* enable smart idle */
> - /*
> - * MUSB AUTOIDLE don't work in 3430.
> - * Workaround by Richard Woodruff/TI
> - */
> - if (!cpu_is_omap3430())
> - l |= AUTOIDLE; /* enable auto idle */
is this taken care somewhere else ?
> @@ -431,28 +395,30 @@ static int __init omap2430_probe(struct
> pdev->num_resources);
> if (ret) {
> dev_err(&pdev->dev, "failed to add resources\n");
> - goto err4;
> + goto err2;
> }
>
> ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
> if (ret) {
> dev_err(&pdev->dev, "failed to add platform_data\n");
> - goto err4;
> + goto err2;
> }
>
> ret = platform_device_add(musb);
> if (ret) {
> dev_err(&pdev->dev, "failed to register musb device\n");
> - goto err4;
> + goto err2;
> }
>
> - return 0;
> + pm_runtime_enable(&pdev->dev);
> + if (pm_runtime_get_sync(&pdev->dev) < 0) {
you have the status variable, so how about:
status = pm_runtime_get_sync(&pdev->dev);
if (status < 0) {
??
> + dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
> + pm_runtime_disable(&pdev->dev);
move the pm_runtime_disable() to err3, maybe. Then just call goto err3
here.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
