Hema HK <hem...@ti.com> writes:
> Using omap_device_build API instead of platform_device_register for
> OMAP2430,OMAP34xx and OMAP4430 musb device registration.
> The device specific resources defined in centralized
> database will be used.
Except for AM35x.
NACK, for same reasons as previous version of this patch.
Kevin
> Signed-off-by: Hema HK <hem...@ti.com>
> Cc: Felipe Balbi <ba...@ti.com>
> Cc: Tony Lindgren <t...@atomide.com>
> Cc: Kevin Hilman <khil...@deeprootsystems.com>
> Cc: Cousson, Benoit <b-cous...@ti.com>
> Cc: Paul Walmsley <p...@pwsan.com>
> ---
> arch/arm/mach-omap2/usb-musb.c | 76
> +++++++++++++++++++++++++++++------------
> 1 file changed, 55 insertions(+), 21 deletions(-)
>
> Index: linux-2.6/arch/arm/mach-omap2/usb-musb.c
> ===================================================================
> --- linux-2.6.orig/arch/arm/mach-omap2/usb-musb.c
> +++ linux-2.6/arch/arm/mach-omap2/usb-musb.c
> @@ -31,9 +31,12 @@
> #include <mach/am35xx.h>
> #include <plat/usb.h>
> #include "control.h"
> +#include <plat/omap_device.h>
>
> #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
>
> +static const char name[] = "musb-omap2430";
> +
> static void am35x_musb_reset(void)
> {
> u32 regval;
> @@ -170,7 +173,7 @@ static struct musb_hdrc_platform_data mu
> static u64 musb_dmamask = DMA_BIT_MASK(32);
>
> static struct platform_device musb_device = {
> - .name = "musb-omap2430",
> + .name = "musb-am35x",
> .id = -1,
> .dev = {
> .dma_mask = &musb_dmamask,
> @@ -181,26 +184,23 @@ static struct platform_device musb_devic
> .resource = musb_resources,
> };
>
> +static struct omap_device_pm_latency omap_musb_latency[] = {
> + {
> + .deactivate_func = omap_device_idle_hwmods,
> + .activate_func = omap_device_enable_hwmods,
> + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
> + },
> +};
> +
> void __init usb_musb_init(struct omap_musb_board_data *board_data)
> {
> - if (cpu_is_omap243x()) {
> - musb_resources[0].start = OMAP243X_HS_BASE;
> - } else if (cpu_is_omap3517() || cpu_is_omap3505()) {
> - musb_device.name = "musb-am35x";
> - musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
> - musb_resources[1].start = INT_35XX_USBOTG_IRQ;
> - board_data->set_phy_power = am35x_musb_phy_power;
> - board_data->clear_irq = am35x_musb_clear_irq;
> - board_data->set_mode = am35x_musb_set_mode;
> - board_data->reset = am35x_musb_reset;
> - } else if (cpu_is_omap34xx()) {
> - musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
> - } else if (cpu_is_omap44xx()) {
> - musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
> - musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
> - musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
> - }
> - musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
> + struct omap_hwmod *oh;
> + struct omap_device *od;
> + struct platform_device *pdev;
> + struct device *dev;
> + int bus_id = -1;
> + const char *oh_name = "usb_otg_hs";
> + struct musb_hdrc_platform_data *pdata;
>
> /*
> * REVISIT: This line can be removed once all the platforms using
> @@ -212,8 +212,42 @@ void __init usb_musb_init(struct omap_mu
> musb_plat.mode = board_data->mode;
> musb_plat.extvbus = board_data->extvbus;
>
> - if (platform_device_register(&musb_device) < 0)
> - printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
> + if (cpu_is_omap3517() || cpu_is_omap3505()) {
> + musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
> + musb_resources[1].start = INT_35XX_USBOTG_IRQ;
> + board_data->set_phy_power = am35x_musb_phy_power;
> + board_data->clear_irq = am35x_musb_clear_irq;
> + board_data->set_mode = am35x_musb_set_mode;
> + board_data->reset = am35x_musb_reset;
> + musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
> +
> + if (platform_device_register(&musb_device) < 0)
> + printk(KERN_ERR "Unable to register HS-USB \
> + (MUSB) device\n");
> + } else {
> + oh = omap_hwmod_lookup(oh_name);
> + if (!oh) {
> + pr_err("Could not look up %s\n", oh_name);
> + return;
> + }
> +
> + pdata = &musb_plat;
> + od = omap_device_build(name, bus_id, oh, pdata,
> + sizeof(*pdata), omap_musb_latency,
> + ARRAY_SIZE(omap_musb_latency), false);
> + if (IS_ERR(od)) {
> + pr_err("Could not build omap_device for %s %s\n",
> + name, oh_name);
> + return;
> + }
> +
> + pdev = &od->pdev;
> + dev = &pdev->dev;
> + get_device(dev);
> + dev->dma_mask = &musb_dmamask;
> + dev->coherent_dma_mask = musb_dmamask;
> + put_device(dev);
> + }
> }
>
> #else
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
