Cleanup GPIO IRQ enable/disable handling by removing SoC-specific
Also split enable/disable IRQ into separate functions for better
readability and also facilitate potentially moving to generic irq_chip
in the future.
Signed-off-by: Kevin Hilman <khil...@ti.com>
---
arch/arm/mach-omap1/gpio15xx.c | 4 +
arch/arm/mach-omap1/gpio16xx.c | 5 +
arch/arm/mach-omap1/gpio7xx.c | 4 +
arch/arm/mach-omap2/gpio.c | 6 ++
arch/arm/plat-omap/gpio.c | 129 ++++++++------------------------
arch/arm/plat-omap/include/plat/gpio.h | 5 +
6 files changed, 54 insertions(+), 99 deletions(-)
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 487a087..9175624 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -39,6 +39,8 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
.datain = OMAP_MPUIO_INPUT_LATCH,
.dataout = OMAP_MPUIO_OUTPUT,
.irqstatus = OMAP_MPUIO_GPIO_INT,
+ .irqenable = OMAP_MPUIO_GPIO_MASKIT,
+ .irqenable_inv = true,
};
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
@@ -77,6 +79,8 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
.datain = OMAP1510_GPIO_DATA_INPUT,
.dataout = OMAP1510_GPIO_DATA_OUTPUT,
.irqstatus = OMAP1510_GPIO_INT_STATUS,
+ .irqenable = OMAP1510_GPIO_INT_MASK,
+ .irqenable_inv = true,
};
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 3e52b7f..a6d4a71 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -42,6 +42,8 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
.datain = OMAP_MPUIO_INPUT_LATCH,
.dataout = OMAP_MPUIO_OUTPUT,
.irqstatus = OMAP_MPUIO_GPIO_INT,
+ .irqenable = OMAP_MPUIO_GPIO_MASKIT,
+ .irqenable_inv = true,
};
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
@@ -82,6 +84,9 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
.datain = OMAP1610_GPIO_DATAIN,
.dataout = OMAP1610_GPIO_DATAOUT,
.irqstatus = OMAP1610_GPIO_IRQSTATUS1,
+ .irqenable = OMAP1610_GPIO_IRQENABLE1,
+ .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1,
+ .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1,
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 35e8b31..880f3cb 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -44,6 +44,8 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
.datain = OMAP_MPUIO_INPUT_LATCH / 2,
.dataout = OMAP_MPUIO_OUTPUT / 2,
.irqstatus = OMAP_MPUIO_GPIO_INT / 2,
+ .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2,
+ .irqenable_inv = true,
};
static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
@@ -82,6 +84,8 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
.datain = OMAP7XX_GPIO_DATA_INPUT,
.dataout = OMAP7XX_GPIO_DATA_OUTPUT,
.irqstatus = OMAP7XX_GPIO_INT_STATUS,
+ .irqenable = OMAP7XX_GPIO_INT_MASK,
+ .irqenable = true,
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 7c5e67d..cc26677 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -78,6 +78,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void
*unused)
pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
+ pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+ pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
+ pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
break;
case 2:
pdata->bank_type = METHOD_GPIO_44XX;
@@ -88,6 +91,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void
*unused)
pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
+ pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+ pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+ pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
break;
default:
WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 4f875cf..17833c8 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -512,129 +512,60 @@ static inline void _clear_gpio_irqstatus(struct
gpio_bank *bank, int gpio)
static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
{
void __iomem *reg = bank->base;
- int inv = 0;
u32 l;
u32 mask = (1 << bank->width) - 1;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_MASK;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_IRQENABLE1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_MASK;
- inv = 1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_IRQENABLE1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_IRQSTATUSSET0;
- break;
-#endif
- default:
- WARN_ON(1);
- return 0;
- }
-
+ reg += bank->regs->irqenable;
l = __raw_readl(reg);
- if (inv)
+ if (bank->regs->irqenable_inv)
l = ~l;
l &= mask;
return l;
}
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int
enable)
+static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
{
void __iomem *reg = bank->base;
u32 l;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
- l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_MASK;
+ if (bank->regs->set_irqenable) {
+ reg += bank->regs->set_irqenable;
+ l = gpio_mask;
+ } else {
+ reg += bank->regs->irqenable;
l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
+ if (bank->regs->irqenable_inv)
+ l &= ~gpio_mask;
else
l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (enable)
- reg += OMAP1610_GPIO_SET_IRQENABLE1;
- else
- reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
+ }
+
+ __raw_writel(l, reg);
+}
+
+static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+ void __iomem *reg = bank->base;
+ u32 l;
+
+ if (bank->regs->clr_irqenable) {
+ reg += bank->regs->clr_irqenable;
l = gpio_mask;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_MASK;
+ } else {
+ reg += bank->regs->irqenable;
l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
+ if (bank->regs->irqenable_inv)
l |= gpio_mask;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- if (enable)
- reg += OMAP24XX_GPIO_SETIRQENABLE1;
- else
- reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
- l = gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- if (enable)
- reg += OMAP4_GPIO_IRQSTATUSSET0;
else
- reg += OMAP4_GPIO_IRQSTATUSCLR0;
- l = gpio_mask;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
+ l &= ~gpio_mask;
}
+
__raw_writel(l, reg);
}
static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int
enable)
{
- _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio), enable);
+ _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
}
/*
@@ -840,9 +771,9 @@ static void gpio_irq_handler(unsigned int irq, struct
irq_desc *desc)
/* clear edge sensitive interrupts before handler(s) are
called so that we don't miss any interrupt occurred while
executing them */
- _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
+ _disable_gpio_irqbank(bank, isr_saved & ~level_mask);
_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
- _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
+ _enable_gpio_irqbank(bank, isr_saved & ~level_mask);
/* if there is only edge sensitive GPIO pin interrupts
configured, we could unmask GPIO bank interrupt immediately */
diff --git a/arch/arm/plat-omap/include/plat/gpio.h
b/arch/arm/plat-omap/include/plat/gpio.h
index aedd732..c7e3a56 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -182,6 +182,11 @@ struct omap_gpio_reg_offs {
u16 clr_dataout;
u16 irqstatus;
u16 irqstatus2;
+ u16 irqenable;
+ u16 set_irqenable;
+ u16 clr_irqenable;
+
+ bool irqenable_inv;
};
struct omap_gpio_platform_data {
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
