Hi Tomi,
On 05/09/11 10:36, Tomi Valkeinen wrote:
> Port the old omapfb panel driver to DSS2. This patch changes the board
> file only, the driver is ported in separate patch.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> Cc: Hunyue Yau <h...@mvista.com>
> ---
> arch/arm/mach-omap2/board-2430sdp.c | 84
> +++++++++++++++++++++++++++++------
> 1 files changed, 70 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c
> b/arch/arm/mach-omap2/board-2430sdp.c
> index 1fa6bb8..9b6e987 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -38,6 +38,8 @@
> #include <plat/gpmc.h>
> #include <plat/usb.h>
> #include <plat/gpmc-smc91x.h>
> +#include <plat/display.h>
> +#include <plat/panel-generic-dpi.h>
>
> #include "mux.h"
> #include "hsmmc.h"
> @@ -98,20 +100,79 @@ static struct platform_device sdp2430_flash_device = {
> .resource = &sdp2430_flash_resource,
> };
>
> -static struct platform_device sdp2430_lcd_device = {
> - .name = "sdp2430_lcd",
> - .id = -1,
> -};
> -
> static struct platform_device *sdp2430_devices[] __initdata = {
> &sdp2430_flash_device,
> +};
> +
> +/* LCD */
> +#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
> +#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
> +
> +static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
> +{
> + gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
> + gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
> +
> + return 0;
> +}
> +
> +static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
> +{
> + gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
> + gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
> +}
> +
> +static struct panel_generic_dpi_data sdp2430_panel_data = {
> + .name = "2430sdp",
> + .platform_enable = sdp2430_panel_enable_lcd,
> + .platform_disable = sdp2430_panel_disable_lcd,
> +};
> +
> +static struct omap_dss_device sdp2430_lcd_device = {
> + .name = "lcd",
> + .driver_name = "generic_dpi_panel",
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .phy.dpi.data_lines = 16,
> + .data = &sdp2430_panel_data,
> +};
> +
> +static struct omap_dss_device *sdp2430_dss_devices[] = {
> &sdp2430_lcd_device,
> };
>
> -static struct omap_lcd_config sdp2430_lcd_config __initdata = {
> - .ctrl_name = "internal",
> +static struct omap_dss_board_info sdp2430_dss_data = {
> + .num_devices = ARRAY_SIZE(sdp2430_dss_devices),
> + .devices = sdp2430_dss_devices,
> + .default_device = &sdp2430_lcd_device,
> };
>
> +static void __init sdp2430_display_init(void)
> +{
> + int r;
> +
> + r = gpio_request_one(SDP2430_LCD_PANEL_ENABLE_GPIO,
> + GPIOF_OUT_INIT_LOW, "LCD reset");
> + if (r) {
> + printk(KERN_ERR "failed to get LCD reset GPIO\n");
> + goto err0;
> + }
> +
> + r = gpio_request_one(SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
> + GPIOF_OUT_INIT_LOW, "LCD Backlight");
> + if (r) {
> + printk(KERN_ERR "failed to get LCD backlight GPIO\n");
can both printks be pr_err?
> + goto err1;
> + }
> +
> + omap_display_init(&sdp2430_dss_data);
> +
> + return;
> +err1:
> + gpio_free(SDP2430_LCD_PANEL_ENABLE_GPIO);
> +err0:
> + return;
> +}
I think using gpio_request_array() will be much cleaner here...
> +
> #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
>
> static struct omap_smc91x_platform_data board_smc91x_data = {
> @@ -136,10 +197,6 @@ static inline void board_smc91x_init(void)
>
> #endif
>
> -static struct omap_board_config_kernel sdp2430_config[] __initdata = {
> - {OMAP_TAG_LCD, &sdp2430_lcd_config},
> -};
> -
> static void __init omap_2430sdp_init_early(void)
> {
> omap2_init_common_infrastructure();
> @@ -244,9 +301,6 @@ static void __init omap_2430sdp_init(void)
>
> omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
>
> - omap_board_config = sdp2430_config;
> - omap_board_config_size = ARRAY_SIZE(sdp2430_config);
> -
> omap2430_i2c_init();
>
> platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
> @@ -263,6 +317,8 @@ static void __init omap_2430sdp_init(void)
> ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
> if (ret == 0)
> gpio_direction_output(SECONDARY_LCD_GPIO, 0);
> +
> + sdp2430_display_init();
> }
>
> static void __init omap_2430sdp_map_io(void)
--
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
