On Thu, May 12, 2011 at 10:59 PM, Peter Ujfalusi <peter.ujfal...@ti.com> wrote: > On Thursday 12 May 2011 21:43:20 Steve Calfee wrote: >> Since it is set to 0xF0F, doesn't this set it as master? > > Sorry, that is correct, McBSP is configured as msater. > >> Also, spelunking the kernel sources, I cannot seem to find the source >> for mcbsp_data->regs -- do you know where it gets set initially? > > They configured within sound/soc/omap/omap-pcm.c > > Have you configured the clk source, and divider correctly for McBSP port from > the machine driver (with snd_soc_dai_set_sysclk)? >
Hi, Thanks for the suggestions. I think I have it correct. I was able to load the original sound/soc/beagleboard.c and the codec/twl4030 and play a wav file. I have been copying that to try and get my new codec driver to work. One immediate difference is that the system sets up the twl4030 as the master i2s device on the bus. So I changed my codec over to do that too. Now the mcbsp register dump matches the working setup. I put in a few debug statements. It appears that my DMA never gets started. I know it can work with a different machine and codec driver, but not mine. I don't see any explicit DMA init, but that must be the problem. Any more ideas? Thanks, Steve -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
